« previous next »
Pages: [1]   Go Down

Author Topic: Are all 305 blocks stamped 305 on the block behind the power steering pump?  (Read 2723 times)

Offline fitz

  • Senior Member
  • ****
  • Posts: 2085
Are all 305 blocks stamped 305 on the block behind the power steering pump?
« on: February 12, 2009, 09:50:25 pm »
 I have a 82 stepside 2W.D. which I assumed had a 305 in it. Yesterday while changing the oil I noticed that the block did not have the "305" cast into the block on the drivers side near the power steering pump. I've seen several 305 motors stamped in this location. Just wondering if all of them came that way (cant see the casting #'s on the back of the block to tell for sure). 
                                                                                    Fitz
« Last Edit: February 12, 2009, 10:07:58 pm by fitz »
Logged

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: Are all 305 blocks stamped 305 on the block behind the power steering pump?
« Reply #1 on: February 13, 2009, 09:06:43 am »
No not all 305's have the CAST 305 on them.
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt

Offline 406 Q-ship

  • Newbie
  • Posts: 53
Re: Are all 305 blocks stamped 305 on the block behind the power steering pump?
« Reply #2 on: February 18, 2009, 02:13:41 am »
The 305 cast into the block came on the later one pieces rearmain seal engines.  82 will still be the 2 pieces seal engine.
Logged
The difference between genius and stupidity.......Genius has limits.
Pages: [1]   Go Up
« previous next »