Author Topic: 76 305 in a 85 4x4  (Read 2775 times)

Offline murraygmc

  • Frequent Member
  • **
  • Posts: 301
  • 85 gmc 4x4
76 305 in a 85 4x4
« on: April 13, 2009, 02:19:23 pm »
hay guys i have a 76 305 and on the gass pump i dont have a return line so what do i do with the return line going back to the tank plug it ?  and i have no charcole can any more and have lines that whent to what as well shuld i plug them to ?
85 gmc high serria 4x4

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19192
Re: 76 305 in a 85 4x4
« Reply #1 on: April 13, 2009, 06:44:02 pm »
Why don't you have a return line? The pump has an internal bleed but you should run a pressure regulator and a return if it's an aftermarket pump.
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline murraygmc

  • Frequent Member
  • **
  • Posts: 301
  • 85 gmc 4x4
Re: 76 305 in a 85 4x4
« Reply #2 on: April 14, 2009, 08:36:31 am »
idk why the pump dont have a return line. what do i do about the hoses that went down to the chaircole can plug them or what thanks
85 gmc high serria 4x4

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 76 305 in a 85 4x4
« Reply #3 on: April 15, 2009, 12:21:15 am »
i know on my 75 motor it didn't have a return line but my 86 does so when i swapped motors i also swapped pumps
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes