« previous next »
Pages: [1]   Go Down

Author Topic: Question on my 350 buildup  (Read 4908 times)

Offline exilous

  • Registered Users
  • *
  • Posts: 244
Question on my 350 buildup
« on: June 20, 2009, 06:19:37 pm »
So I am finally starting to build my engine and I heard about this Glyptal stuff. Supposed to seal everything up make the oil flow better blah blah blah. I asked a few engine builders I know and a few guys like it a few guys don't. What do you guys think about it? Should I get a can and see what happens? What would be the ultimate benefits of using the stuff? Here is a link to what I'm talking about,

http://www.eastwood.com/glyptal-red-brush-on-1-qt.html
Logged

Offline 07montecarlo

  • Newbie
  • Posts: 44
Re: Question on my 350 buildup
« Reply #1 on: June 20, 2009, 06:54:50 pm »
good benefits been around for a zillion years..gets oil back to the bottom alot faster than plain cast surface...
i say go for it
Logged

Offline Donut

  • Frequent Member
  • **
  • Posts: 402
Re: Question on my 350 buildup
« Reply #2 on: June 20, 2009, 07:13:28 pm »
What would happen if it started flaking off?  For that matter, would it really be a benefit?.
Logged
'73 Chevy K-20 ***SOLD***
350/tbh350/np205
My plow was half price if i took the truck with it.

'86 C-30 dually, 454/tbh400

Offline 07montecarlo

  • Newbie
  • Posts: 44
Re: Question on my 350 buildup
« Reply #3 on: June 20, 2009, 07:15:26 pm »
if you prep according to directions it wont flake..
Logged

Offline exilous

  • Registered Users
  • *
  • Posts: 244
Re: Question on my 350 buildup
« Reply #4 on: June 20, 2009, 07:57:10 pm »
Well i might have to order myself a can of the stuff to try it out. I'llwait to hear a few more reviews before i make the decision first.
Logged

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: Question on my 350 buildup
« Reply #5 on: June 20, 2009, 08:36:44 pm »
street motor don't waste your money and time
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: Question on my 350 buildup
« Reply #6 on: June 20, 2009, 11:57:44 pm »
Quote from: joesgarage71 on June 20, 2009, 08:36:44 pm
street motor don't waste your money and time
x2
Logged
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19174
Re: Question on my 350 buildup
« Reply #7 on: June 21, 2009, 09:52:32 am »
x3 - waste of time.

Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline exilous

  • Registered Users
  • *
  • Posts: 244
Re: Question on my 350 buildup
« Reply #8 on: June 21, 2009, 12:48:04 pm »
ok well thanks for all your advice seems like it is a group answer not to do it. Thanks for the info guys. and for savin me time and money.
Logged

Offline eventhorizon66

  • Senior Member
  • ****
  • Posts: 1909
Re: Question on my 350 buildup
« Reply #9 on: June 21, 2009, 01:25:52 pm »
 8)
« Last Edit: June 21, 2009, 01:28:19 pm by eventhorizon66 »
Logged
'85 C10 SWB 350 700R4 TKO600
Pages: [1]   Go Up
« previous next »