how to remove crank for panel

[84chevyboy]

well today i just aquired to nice donor doors i will be takin tha glass and channel out of tha pass. side for my power windows, but i need to find out how to take of tha crank so i can take off tha panel to get inside tha door. thanks.

[low budget]

Go to an auto parts store and get one of these:

 http://www.lockpickshop.com/LT460.html

Here is step by step instructions of how to get the clips off.  It's easy...

http://www.ehow.com/how_2112895_install-car-window-crank-handles.html

Hope this helps...

[gold84gmc]

having one of those tools makes it a lot easier to do

[Flamingbig10]

Ive used a small slotted screw driver before

[choptop]

I use a red rag. If you look at the back of the handle, you can see the open end of the clip. Take a rag, and loop it around the handle beteen the panel where the open side of the clip is facing the bottom of the loop you made in the rag. Now just pull the rag working the ends back and forth a little and the clip pops out.

[low budget]

Wow, Chop, I'll have to try that.  I always used a small screwdriver also...

[DnStClr]

Great tip, Chop! Thanks.