« previous next »
Pages: [1]   Go Down

Author Topic: th350 short tailshaft  (Read 2437 times)

Offline bboyd

  • Newbie
  • Posts: 24
th350 short tailshaft
« on: October 30, 2009, 07:34:20 pm »
can i install a th350 with a short tailshaft in my truck if it was a long tailshaft before? i know id need a new drive shaft but thats fine.  if i cant can i take the long tail shaft off the old trans and put it on the other tranny thanks guys
Logged
I swear i was just going to put a new motor in but...

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19192
Re: th350 short tailshaft
« Reply #1 on: October 30, 2009, 08:08:19 pm »
Yes you can swap it with the new driveshaft. The other way is possible but requires a tear down of both transmissions
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: th350 short tailshaft
« Reply #2 on: October 30, 2009, 08:11:21 pm »
The short will fit in place of the long, as for switching the tail shafts you'll have to change the output shafts too and that takes disassy. of most of the trany to get the job done.
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt
Pages: [1]   Go Up
« previous next »