« previous next »
Pages: [1]   Go Down

Author Topic: One more question about my harmonic balancer ~  (Read 5891 times)

Offline nativetexan

  • Registered Users
  • *
  • Posts: 174
One more question about my harmonic balancer ~
« on: November 09, 2009, 12:52:22 pm »
So, the balancer that I bought from autozone seems like it is too ling to send all the way in to my timing cover. Can anyone privide specs about what the gap is suppose to look like on my 87 5.7 350?
 If I send it all the way in, the balancer is sitting about a half an inch from the cover and about an eighth of an inch from the timing indicator tab on the cover.
 I checked with autozone and the only other one they have is the same overall width as the one I got.
The only other thing I can think to do is go to a used parts place and get one that I know came off my year motor...
Or go to the salvage yard and look at one to see what it is suppose to look like.

But if anyone has a photo of their's for me I can compare it to mine and see if I have it on far enough...

THANKS IN ADVANCE!!! ;D
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18467
    • http://www.73-87chevytrucks.com
Re: One more question about my harmonic balancer ~
« Reply #1 on: November 09, 2009, 03:50:42 pm »
I have no idea what you are asking.
Logged

Offline nativetexan

  • Registered Users
  • *
  • Posts: 174
Re: One more question about my harmonic balancer ~
« Reply #2 on: November 09, 2009, 06:01:37 pm »
I cant upload pics right now but i guess what Im saying is, how do I know if the balancer is on properly? It is on as far as it can go but, it looks like it should be on the shaft further than what it is.
Logged

Offline nativetexan

  • Registered Users
  • *
  • Posts: 174
Re: One more question about my harmonic balancer ~
« Reply #3 on: November 09, 2009, 06:23:37 pm »

Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19190
Re: One more question about my harmonic balancer ~
« Reply #4 on: November 09, 2009, 06:31:13 pm »
Did you line up the key way? By ling you mean long right? how far did it go on? You just haven't installed it all the way yet. Lousy pic btw...but from what I can make out it's got a ways to go.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline nativetexan

  • Registered Users
  • *
  • Posts: 174
Re: One more question about my harmonic balancer ~
« Reply #5 on: November 09, 2009, 07:49:34 pm »
lol! The pics are curtousy of my blackberry so bear with me. the flash is a little overpowering.

Here is another pic... i pushed it on a bit more and I am pretty sure that it is as far as it can go. the cranks got real stiff, not just hard. but it stopped sooo,


Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19190
Re: One more question about my harmonic balancer ~
« Reply #6 on: November 09, 2009, 07:56:07 pm »
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline nativetexan

  • Registered Users
  • *
  • Posts: 174
Re: One more question about my harmonic balancer ~
« Reply #7 on: November 09, 2009, 08:07:33 pm »
Vile, you seem cranky... sorry don't mean to be annoying but, whats an interferance fit...

Also, that is the same tool I am using. It also comes with the removal set but yeah, that's it.
Logged

Offline eventhorizon66

  • Senior Member
  • ****
  • Posts: 1909
Re: One more question about my harmonic balancer ~
« Reply #8 on: November 09, 2009, 09:47:33 pm »
Interference fit - the hole is slightly smaller than the shaft.

http://www.mech.uq.edu.au/courses/mech2110/standard_fits/types_of_fits.gif
Logged
'85 C10 SWB 350 700R4 TKO600

Offline nativetexan

  • Registered Users
  • *
  • Posts: 174
Re: One more question about my harmonic balancer ~
« Reply #9 on: November 09, 2009, 10:43:04 pm »
I thought you were talking about the other interference... ;D ;D ;D 

Well, I put the pulley on and it is lining up with the steering pump pulley so...

I call it good. Thanks for your help guys!!
Logged
Pages: [1]   Go Up
« previous next »