« previous next »
Pages: [1]   Go Down

Author Topic: Doors off a Burb  (Read 4171 times)

Offline kurtdirt1

  • Newbie
  • Posts: 23
Doors off a Burb
« on: December 21, 2009, 01:18:46 am »
A buddy of mine gave me a pair of doors off a burb today with pwr windows/locks to put on my 86 Silverado. There are obviously extra buttons that I do not need, I have some good door panels off a Silverado that had full power. Is there a way that I could put the switches and panels off the silverado onto the burb doors so I don't have a bunch of extra buttons? What wires would I need to eliminate to get the Silverado switches to work? Or would I be better off just going to the wrecking yard and pulling the wiring from the doors on a truck with pwr wind/locks?
Logged
86 SWB 2wd Silverado Bone Stock

Offline Flamingbig10

  • Frequent Member
  • **
  • Posts: 340
Re: Doors off a Burb
« Reply #1 on: December 21, 2009, 07:25:16 am »
yes its a bolt on swap
Logged

Offline kurtdirt1

  • Newbie
  • Posts: 23
Re: Doors off a Burb
« Reply #2 on: December 21, 2009, 02:28:31 pm »
Quote from: Flamingbig10 on December 21, 2009, 07:25:16 am
yes its a bolt on swap


I'm sorry, but what is exactly is a bolt on swap? I appreciate your response, but I'm afraid I'm not clear on what question you're referring to.
« Last Edit: December 21, 2009, 02:47:12 pm by kurtdirt1 »
Logged
86 SWB 2wd Silverado Bone Stock

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: Doors off a Burb
« Reply #3 on: December 21, 2009, 03:45:37 pm »
What he's saying is everything will interchange. Your panels will go right in it's place along with your harness etc.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline kurtdirt1

  • Newbie
  • Posts: 23
Re: Doors off a Burb
« Reply #4 on: December 21, 2009, 04:45:07 pm »
Quote from: VileZambonie on December 21, 2009, 03:45:37 pm
What he's saying is everything will interchange. Your panels will go right in it's place along with your harness etc.

So don't try to make the burb wiring work, just get the harness from a truck correct? The door wiring in particular?
Logged
86 SWB 2wd Silverado Bone Stock

Offline 4x4orbust

  • Frequent Member
  • **
  • Posts: 342
Re: Doors off a Burb
« Reply #5 on: December 21, 2009, 05:36:41 pm »
i think he is saying to use the door panels from the silverado.   the connectors that go into the back of the switches will have to be switched over to accommodate the 2 less switches. (when you look at the back of the switches, you will understand)  i did the same as you, and just left the 2 extra switches in for later use on something, like a power antenna, train horns, or something else i havent even thought of yet.
Logged
1982 chevy K-10 SWB, 355 th350/np208. 2.5"lift, 33" swampers, headers/duals,  current project

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: Doors off a Burb
« Reply #6 on: December 21, 2009, 09:20:20 pm »
don't hit the wrong switch at the drive thru at the bank lol
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Pages: [1]   Go Up
« previous next »