« previous next »
Pages: [1]   Go Down

Author Topic: Door Tools....  (Read 3237 times)

Offline Zeked

  • Newbie
  • Posts: 71
Door Tools....
« on: December 21, 2009, 12:32:14 pm »
I am about to begin restoring my '87 Chevy ShortStep .....

What special tools should I get before removing the doors?

My Ol Dad used to say:  "There aint no hard jobs...just jobs you dont have the right
tools for."  He's been awful right.

Zeke
Logged
Often Wrong......Never in Doubt!

Offline 4x4orbust

  • Frequent Member
  • **
  • Posts: 342
Re: Door Tools....
« Reply #1 on: December 21, 2009, 12:50:27 pm »
i don't think you need any special tools to remove the doors.   just a 9/16 or 5/8 socket, ratchet, and maybe a drill to drill out the rivets on the boot that the electrical runs through (if you have power windows/locks)   it is easier to remove the doors if you take the fender off, but not necessary.
Logged
1982 chevy K-10 SWB, 355 th350/np208. 2.5"lift, 33" swampers, headers/duals,  current project

Offline 78 Chevyrado

  • Z62 ON-ROAD
  • Site Supporters
  • Senior Member
  • ******
  • Posts: 2748
    • My Photobucket Site
Re: Door Tools....
« Reply #2 on: December 21, 2009, 02:04:40 pm »
Nothing special needed unless you want to take the springs off the hinges.
Logged
Kenny

1978 C-20, 350/400, 3.73, Graystone Metallic, Raceline Renegade 8 Wheels - 18x8.5, 275/70R18 BFG KO's

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19171
Re: Door Tools....
« Reply #3 on: December 21, 2009, 03:11:24 pm »
If you don't have an assistant it's easier/lighter too to gut the door while it's on the truck. A block of wood and a floor jack is helpful too.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Pages: [1]   Go Up
« previous next »