« previous next »
Pages: [1] 2   Go Down

Author Topic: egr ?  (Read 7550 times)

Offline 87swb

  • Frequent Member
  • **
  • Posts: 426
egr ?
« on: January 09, 2010, 04:28:32 pm »
quick question. if i wanted to plug my egr valve which side of the vaccum line do i plug, the valve end or the solenoid end? 305 TBI by the way.
Logged

Offline Blue 82

  • Frequent Member
  • **
  • Posts: 281
Re: egr ?
« Reply #1 on: January 09, 2010, 05:52:15 pm »
You might get better MPG if you leave it alone
Logged
82 stepside 2wd 355/th350/3.08 posi

Offline 87swb

  • Frequent Member
  • **
  • Posts: 426
Re: egr ?
« Reply #2 on: January 09, 2010, 06:23:21 pm »
well i'm getting at wit's end here. it won't idle smooth which i know could be a lot of things besides that. but it has new plugs, wires, cap and rotor, new egr valve and solenoid, new iac, new tps, new fp regulator, new tbi gasket. sometimes it will idle smooth and then sometimes it won't.
Logged

Offline Layne

  • Senior Member
  • ****
  • Posts: 1023
Re: egr ?
« Reply #3 on: January 09, 2010, 06:50:08 pm »
Plug the line to the egr.
Logged
77 c-10 - 77 400 86 700r4 "Emmy"
83 citation - 2.5L Four on the Floor!
88 sierra - reman 350 700r4 "Eleanor"
All normal practicality and rational money handling goes out of the window when it comes to my truck.

Offline 87swb

  • Frequent Member
  • **
  • Posts: 426
Re: egr ?
« Reply #4 on: January 09, 2010, 07:30:22 pm »
so plug it going from the solenoid to the actual valve, in other words the valve itself shouldn't have nothing on it then.
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7599
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: egr ?
« Reply #5 on: January 09, 2010, 07:45:12 pm »
Quote from: 87swb on January 09, 2010, 07:30:22 pm
so plug it going from the solenoid to the actual valve, in other words the valve itself shouldn't have nothing on it then.

Yes and if the problem goes away replace the EGR.  I actually lost 1.5 mpg without running with it on a 1982 I had a while back.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline 87swb

  • Frequent Member
  • **
  • Posts: 426
Re: egr ?
« Reply #6 on: January 09, 2010, 10:39:04 pm »
ok
Logged

Offline Blake_H

  • Newbie
  • Posts: 25
Re: egr ?
« Reply #7 on: January 09, 2010, 10:46:28 pm »
Don't know if this will help or not, but I was having a similar problem with mine.  There were many suggestions given in this post http://forum.73-87chevytrucks.com/smforum/index.php?topic=13459.msg107697#msg107697

Before I discovered the blown head gasket, I had a bad TPS Sensor that was causing it to idle rough and figuring it out was driving me crazy as well.  Checking the voltage on that sensor is fairly easy.  This is the first non-carbed truck I've owned, so when all the 'normal' things don't work, I have been thankful for this board.

Hope this helps, and good luck.  I feel your pain.

Logged

Offline 87swb

  • Frequent Member
  • **
  • Posts: 426
Re: egr ?
« Reply #8 on: January 10, 2010, 10:39:40 am »
it idles fine when you first start it up in the morning then when it warms up and you drive it around for awhile and stop it's not smooth. it acts real funny when you put it in reverse and use your brakes, the idle will go way down like it wont's to die and then it picks back up. the brakes seem to make it worse. it will do it in park after it warms up, just let it sit there for a minute and it'll start idling funny. again i've done randomly replaced several things and it's starting to get aggravating. thanks for the replies btw. ;D
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19199
Re: egr ?
« Reply #9 on: January 10, 2010, 10:46:18 am »
It does sound like a sticking EGR. Let us know what happens when you bypass it.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 87swb

  • Frequent Member
  • **
  • Posts: 426
Re: egr ?
« Reply #10 on: January 10, 2010, 11:13:48 am »
i'm gonna try it. one more thing, that charcoal canister down there by the radiator i took it off years ago and connected the line from the tank to the purge line. could that have an effect on anything?
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19199
Re: egr ?
« Reply #11 on: January 10, 2010, 11:17:30 am »
Yes! If there's no cannister plug the line.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 87swb

  • Frequent Member
  • **
  • Posts: 426
Re: egr ?
« Reply #12 on: January 10, 2010, 11:27:09 am »
really!!! ah heck i've had it like that for long time. that may be why it runs the way it does. :o i'll have to go out there and undo it. plug the purge line on the tbi and leave the tank line open so it'll vent, right?
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19199
Re: egr ?
« Reply #13 on: January 10, 2010, 11:32:37 am »
NO or you will have a fuel leak. When pressure builds in the tank fuel may come pouring out. Just plug it for now and next time you're at the boneyard pick up a new cannister.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 87swb

  • Frequent Member
  • **
  • Posts: 426
Re: egr ?
« Reply #14 on: January 10, 2010, 11:37:58 am »
it wasn't nothing wrong with the one it had i tried to break into it and ended up busting it. but i can get one to put back on it. thanks for the heads up.
Logged
Pages: [1] 2   Go Up
« previous next »