Author Topic: 81 Crew cab dually 2wd CUMMINS (Read 97146 times)

Pullin81 · « **Reply #75 on:** January 01, 2011, 01:14:18 pm »

my mounts are from energy suspension.

Pullin81 · « **Reply #76 on:** January 09, 2011, 11:15:32 pm »

front bumper 99% done and rear bumper as far as i got today just have to finish the botton but run out of gas for the welder,and the new hood...harwood fiberglas hood

jaredts · « **Reply #77 on:** January 10, 2011, 05:27:29 am »

Wicked looking bumpers. I like the look but remind me to stay about 1/2 mile away from you on the interstate, they look super dangerous.

SmokeShow · « **Reply #78 on:** January 12, 2011, 08:31:42 pm »

what thickness are your bumpers made of?? Job well done on them!

Jim Rockford · « **Reply #79 on:** January 13, 2011, 10:12:45 am »

I like the integrated step in the rear bumper.. good idea.

Pullin81 · « **Reply #80 on:** January 14, 2011, 12:10:12 am »

Quote from: SmokeShow on January 12, 2011, 08:31:42 pm

what thickness are your bumpers made of?? Job well done on them!

the bumpers are made of 10 gauge steel the suports off of the frame are 1X3 flat bar...thanks for checkin out the ride....transfer case came today going to pick ip up tomorrow and start mounting it....

Grim 82 · « **Reply #81 on:** January 14, 2011, 12:29:41 am »

Those are some wicked bumpers. Well done.

1983stepside · « **Reply #82 on:** January 15, 2011, 09:04:29 pm »

nice build, i love the bumpers, wheels and the paint you picked cant wait to see more,

trillionmiler · « **Reply #83 on:** January 19, 2011, 09:57:15 am »

That purple looks good.

Pullin81 · « **Reply #84 on:** January 29, 2011, 10:49:58 am »

well ive been working away on the truck the last few days.....i picked up some 2005 chev crew cab seats that ive been orking on mounting i have half the rear seat mounted so far the fronts are going to be a little harder going to have to notch down the floors to get the seats to sit lower... once its all said and down ive priced out some katzkin seat covers. Just trying to get odds and ends finised up few small pieces on the bumpers. need to get the transfercase mounted that i purchased from moonshine maufia motorsports thanks to a lead on this site...

Pullin81 · « **Reply #85 on:** February 06, 2011, 10:42:42 am »

Just an update ive been working on a few things. i tend to jump around around a little bit...so ive started mounting my seats what i did with the rear was ended up takeing appart the rear seats out of the 05 chevy and cut the brackets off that frame and installed the brackets on the original 80 truck seat frame...the rear seats still even tilt forward...the front seats well they sat to high in the truck i i went ahead and cut the floor hump under the seat out and had a friend of mine who works are a steel building shop cut out a pan at his shop whick we covered the hole in the floor with then added a hat channel to connect the cab supports back together..ive also been playing around with the transfercase i got started mounting it and realized i needed to modify the tranny cross memeber i had already built ...

Pullin81 · « **Reply #86 on:** February 14, 2011, 12:36:05 am »

well i got the stock grill fitting over the intercooler which is nice i wanted to run a stock grill.....the last truck i made one....and the rear bumper is finally don except grinding and holes drilled for clevises

Edahall · « **Reply #87 on:** February 14, 2011, 09:32:30 am »

That front bumper you made looks very nice and fits the truck much better than those custom made bumpers.

slammed79 · « **Reply #88 on:** February 14, 2011, 10:14:31 am »

Not too shabby sir! I like it.

beastie_3 · « **Reply #89 on:** February 14, 2011, 10:30:34 pm »

What are the holes for, lights?

News:

Author Topic: 81 Crew cab dually 2wd CUMMINS (Read 97146 times)

Pullin81

Re: New Crew cab 4x4 cummins project.

Pullin81

Re: New Crew cab 4x4 cummins project.

jaredts

Re: New Crew cab 4x4 cummins project.

SmokeShow

Re: New Crew cab 4x4 cummins project.

Jim Rockford

Re: New Crew cab 4x4 cummins project.

Pullin81

Re: New Crew cab 4x4 cummins project.

Grim 82

Re: New Crew cab 4x4 cummins project.

1983stepside

Re: New Crew cab 4x4 cummins project.

trillionmiler

Re: New Crew cab 4x4 cummins project.

Pullin81

Re: New Crew cab 4x4 cummins project.

Pullin81

Re: New Crew cab 4x4 cummins project.

Pullin81

Re: New Crew cab 4x4 cummins project.

Edahall

Re: New Crew cab 4x4 cummins project.

slammed79

Re: New Crew cab 4x4 cummins project.

beastie_3

Re: New Crew cab 4x4 cummins project.