« previous next »
Pages: [1]   Go Down

Author Topic: 4X4 QUESTION  (Read 2571 times)

Offline elmo702

  • Newbie
  • Posts: 5
4X4 QUESTION
« on: February 28, 2010, 02:04:21 am »
Pardon me for the stupid questions I ask on here but I know not much about 4x4. heck I really only know the basics as far as a car goes. Anyways enough preface now to the question? I am trying to take of the front drive shaft off my 73 k10. I got the front off with no problems yet the back where its connected to the transfer case im having issues. Anyone have any tips or tricks? Thanks for any help
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 4X4 QUESTION
« Reply #1 on: February 28, 2010, 11:55:18 am »
use a 1/2" swivel head socket and if you looking at it from the passengers side lock the transfer case and just work that bolt out then unlock the transfer case and rotate the shaft till the next bolt is in that spot
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline 4x4HighSierra

  • Newbie
  • Posts: 40
  • Sqaure body stud
Re: 4X4 QUESTION
« Reply #2 on: March 02, 2010, 10:21:37 pm »
Yea just do what Irish said.  Then take a pry bar and pry it off the flange on the transfer case.  They usually get stuck on the transfer.
Logged
1985 GMC High Sierra K10 mild 350 and rebuilt 700R4 with transgo shift kit

1985 GMC Sierra Classic C10 TPI 350 swapped in and 700R4 and 6 inch drop, with front drop spindles and a axle flip in the back and c notched frame

1995 Chevy Tahoe LT stock
Pages: [1]   Go Up
« previous next »