« previous next »
Pages: [1]   Go Down

Author Topic: Auto floor shifter can it be done?  (Read 17864 times)

Offline 1981 ss chevy

  • Newbie
  • Posts: 93
Auto floor shifter can it be done?
« on: March 28, 2010, 12:39:24 pm »
What would it take to put in a floor shifter for and auto trans i already have buckets in the truck.  Just cut a small hole in floor and hook cable to linkage? I have a shifter assembly outta a 84 Monte SS that had a TH350 trans so its all the same there.  Any ideas anyone?  Its going in an 81 c10 2wd
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: Auto floor shifter can it be done?
« Reply #1 on: March 28, 2010, 12:49:07 pm »
I have a floor shifter in my stepside. You pretty much named it. The linkage is what you need to make sure is set up correctly. Just be careful, most aftermarket ones don't have a shift interlock so it's easy to knock out of park.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Grover 1

  • Frequent Member
  • **
  • Posts: 414
Re: Auto floor shifter can it be done?
« Reply #2 on: March 28, 2010, 02:28:43 pm »
Lokar makes a bolt on one and a cable type
Logged
1978 C-10 SWB
1986 K-10 SWB
1975 C-10 SWB

And here I sit so patiently
Waiting to find out what price
You have to pay to get out of
Going through all these things twice - bd

Offline 1981 ss chevy

  • Newbie
  • Posts: 93
Re: Auto floor shifter can it be done?
« Reply #3 on: March 30, 2010, 08:29:36 am »
ok once its in vile, did you use buy a center console or home made or dont need?
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: Auto floor shifter can it be done?
« Reply #4 on: March 30, 2010, 04:04:48 pm »
 ??? I'm not sure what you are asking?
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Layne

  • Senior Member
  • ****
  • Posts: 1023
Re: Auto floor shifter can it be done?
« Reply #5 on: March 31, 2010, 04:45:03 pm »
Logged
77 c-10 - 77 400 86 700r4 "Emmy"
83 citation - 2.5L Four on the Floor!
88 sierra - reman 350 700r4 "Eleanor"
All normal practicality and rational money handling goes out of the window when it comes to my truck.

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: Auto floor shifter can it be done?
« Reply #6 on: March 31, 2010, 08:31:52 pm »
You can just mount it directly to the floor using an aftermarket shifter.  using a factory one from another vehicle is not going to be a simple task as placement is going to be limited.

This is what one owner did (aftermarket shifter): http://73-87.com/7387garage/interior/console.htm

This is what Jeff did (bigblock73)

Logged

Offline 1981 ss chevy

  • Newbie
  • Posts: 93
Re: Auto floor shifter can it be done?
« Reply #7 on: April 01, 2010, 02:45:23 pm »
the one i have outta the monte seems as thought it would bolt in there nice, however you really never know until you have it all tore down lol.  But even then i can just weld on some to the bottom of the shifter i have to make it work and sit nice on the floor.
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Auto floor shifter can it be done?
« Reply #8 on: April 01, 2010, 03:52:14 pm »
http://www.customclassictrucks.com/howto/vintage_gear_shifter/index.html is kind of cool if you don't want to lean down.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Layne

  • Senior Member
  • ****
  • Posts: 1023
Re: Auto floor shifter can it be done?
« Reply #9 on: April 03, 2010, 09:40:04 am »
Quote from: zieg85
 kind of cool if you don't want to lean down.
Lol. Made me think of my buddy who put some vice grips though a hole in his cab to the gear selector. He then later stuck a gear selector from an escort in there.
« Last Edit: April 07, 2010, 11:46:21 am by Captkaos »
Logged
77 c-10 - 77 400 86 700r4 "Emmy"
83 citation - 2.5L Four on the Floor!
88 sierra - reman 350 700r4 "Eleanor"
All normal practicality and rational money handling goes out of the window when it comes to my truck.

Offline Armor

  • Registered Users
  • *
  • Posts: 139
Re: Auto floor shifter can it be done?
« Reply #10 on: April 06, 2010, 05:06:53 pm »
i put in a lokar shifter(cable) for my 700r4, love it every time i drive
Logged

Offline 75chevybakers

  • Newbie
  • Posts: 69
Re: Auto floor shifter can it be done?
« Reply #11 on: April 14, 2010, 07:09:33 pm »
Logged

Offline HAULIN IT

  • Senior Member
  • ****
  • Posts: 1542
Re: Auto floor shifter can it be done?
« Reply #12 on: April 16, 2010, 05:58:50 pm »
Logged
Pages: [1]   Go Up
« previous next »