« previous next »
Pages: [1] 2   Go Down

Author Topic: K-30 build, 1st post!  (Read 11606 times)

Offline 747guy

  • Newbie
  • Posts: 6
K-30 build, 1st post!
« on: July 03, 2010, 03:31:40 am »
Hi to All,

Well here we go, I have started this build using an 1985 5/4 ton M1008 cucv Chassis and the springs and 4:56 axles that came with it, and thats all that will be used from the military truck. the frame and springs and axles have been sandblasted, etched, epoxy primmered and Imeron topcoated (New England proof). the cab and bed are from a C-10 Arizona rust free truck (also 85). My first issue I am looking for info on is the brake system. I have converted the rear to disc using the 79 Eldorado calipers with park brake. and I am planning on using the Vac boost and master cyl from one of my K-20's origally the cucv used the hydro-boosetd brake system, will the vaccum sys from the K-20 work ok with the massive calipers on the Dana -60 front? or should I start looking for a hydro boost system to install? any info will be a be greatly appreciated, Thanks!


Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: K-30 build, 1st post!
« Reply #1 on: July 03, 2010, 03:41:45 am »
the k20 vacuum system will be OK, oh yeah welcome from maryland
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: K-30 build, 1st post!
« Reply #2 on: July 03, 2010, 09:34:26 am »
Welcome!
Logged

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: K-30 build, 1st post!
« Reply #3 on: July 03, 2010, 12:27:46 pm »
Welcome from ND
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.

Offline mrboyy17

  • Registered Users
  • *
  • Posts: 131
Re: K-30 build, 1st post!
« Reply #4 on: July 03, 2010, 01:48:26 pm »
why not use the hydro that came with the truck?  its my understanding this system brakes way better than the vacuum boost system.  i would like to go the other direction and put a hydro boost on instead of my vacuum boost system
Logged

Offline 747guy

  • Newbie
  • Posts: 6
Re: K-30 build, 1st post!
« Reply #5 on: July 04, 2010, 08:52:27 pm »
Unfortunatly, I only got the rolling chassis from the cucv, (the good stuff).  Thanks
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: K-30 build, 1st post!
« Reply #6 on: July 06, 2010, 05:09:30 am »
Welcome from NW Indiana
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18462
    • http://www.73-87chevytrucks.com
Re: K-30 build, 1st post!
« Reply #7 on: July 08, 2010, 02:36:00 pm »
Welcome to the site!
Logged

Offline Engineer

  • Senior Member
  • ****
  • Posts: 1402
Re: K-30 build, 1st post!
« Reply #8 on: July 08, 2010, 06:56:51 pm »
Your vacuum booster should work just fine.

I should also add that the vac booster will be more trouble free. I.e. no hydraulic lines to leak or get in the way.
Logged
2002 Chevy 2500HD 4x4 8.1/ZF6sp RC/LB
2001 Chevy 2500HD 4x4 6.0/4L85E EC/SB
1997 Chevy Blazer 4x4
1994 Chevy K-2500 4x4 C6P 5.7/4L80E
1979 Chevy K-30 4x4 4sp 4.10
1977 Chevy K-30 4x4 4sp 4.10 454

Dad of an Eagle Scout, and a Life Scout

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: K-30 build, 1st post!
« Reply #9 on: July 09, 2010, 12:27:31 pm »
Your profile appears to have a horrible picture....is that a rolled truck?
Logged

Offline 747guy

  • Newbie
  • Posts: 6
Re: K-30 build, 1st post!
« Reply #10 on: July 10, 2010, 10:17:33 pm »
No roll over,  Telephone pole repositioning!!    1 cord of wet red oak firewood in the back stacked over the cab, ice covered road, last load for the day, ect. ect. ect. bottom line  pole-1    /    K-30 -0
Logged

Offline greatdane

  • Registered Users
  • *
  • Posts: 223
Re: K-30 build, 1st post!
« Reply #11 on: July 10, 2010, 10:52:44 pm »
Ouch!!! Game over man! Welcome....
Logged
'84 GMC Sierra Classic SWB 2WD
'08 Chevy Silverado Ext Cab 2WD
'74 AMC Matador 2dr Coupe

Offline 80stepsideguy

  • Senior Member
  • ****
  • Posts: 1389
Re: K-30 build, 1st post!
« Reply #12 on: July 10, 2010, 11:31:40 pm »
Hey man what part of rhode island you in?? I lived in coventry for 28 1/2 years before moving to florida in 2002.I know them seasons all to well in RI lol.. I`ll be home on september 2nd for a week to see family...

Welcome abord by the way..
thanks
pat
Logged
1980 Chevy c10 restomod:  350/700r4 12 bolt 3.73 rearend iris blue metallic
1998 Chevy 1500 S/B 2wd
1970 cougar convertible: triple white 1 of 1
1931 Ford Model A roadster(family inherited)
2014 Hyundai Tucson Limited(my daily driver)
2023 Kia Sportage X Pro (her daily driver).

Offline 747guy

  • Newbie
  • Posts: 6
Re: K-30 build, 1st post!
« Reply #13 on: July 11, 2010, 12:45:31 am »

 Foster,  BUT,   I still have most of my teeth!     I lived in Loxahatchee FLA in 80's swamping my 78 K-10 stepside, Great fun!! Mama made us move back to RI
Logged

Offline 747guy

  • Newbie
  • Posts: 6
Re: K-30 build, 1st post!
« Reply #14 on: July 11, 2010, 12:57:48 am »
Thanks to all for the welcome,  I am overseas 20 days each month based out of the Middle East flying mostly food items and supplies for the troops and it is awesome to come to this site and wind down and read for hours on end about everybodys projects. I am still figuring out how to navigate the site, but getting there. My K-30 project will be a slow going project as I only get a few days at best at home every month to work on it I figure 2 yrs to comleation or divorse and compleation in 1 or 2 months hmmmmm.

                                                                                Thanks Again Everyone!
Logged
Pages: [1] 2   Go Up
« previous next »