« previous next »
Pages: [1]   Go Down

Author Topic: thread sealer for head bolts  (Read 4468 times)

Offline screamin86

  • Junior Member
  • ***
  • Posts: 661
thread sealer for head bolts
« on: August 04, 2010, 09:20:25 pm »
About to put my new heads on my 350 in my 86 k10 and wondering what thread sealer I should go with? I'm runing a 350 bored 040 26cc dish piston stock deck height 416 heads milled 025 felpro 016shim gasket with copper sealer sprayed on and new head bolts.
Logged
86 k10 lwb 4x4:350 .040 214/224 444/466 112lsa performer rpm 1406 lt's summit racing th350 2800stall
03 yukon xl:tint debadge full boltons
86 ta:lm7 hot cam boltons

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: thread sealer for head bolts
« Reply #1 on: August 04, 2010, 09:25:04 pm »
  http://forum.73-87chevytrucks.com/smforum/index.php?topic=3957.0       This is an article on thread sealer for head bolts
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline screamin86

  • Junior Member
  • ***
  • Posts: 661
Re: thread sealer for head bolts
« Reply #2 on: August 06, 2010, 06:47:01 pm »
Well I opened the boxes to the new head bolts I bought and found out they are the new felpros with sealer already on the treads and the smaller 1/2 heads.
Logged
86 k10 lwb 4x4:350 .040 214/224 444/466 112lsa performer rpm 1406 lt's summit racing th350 2800stall
03 yukon xl:tint debadge full boltons
86 ta:lm7 hot cam boltons

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: thread sealer for head bolts
« Reply #3 on: August 06, 2010, 11:01:55 pm »
  Well then problem solved.  I am going to be starting on a rebuild in about 2 months, after my surgery.  I just got another truck and it has a  blown head gasket, so I figured that it is time for a rebuild of all the running gear, since it is my second truck and I can leave it parked while working on it.  I hope you do not run into any problems with your project.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline screamin86

  • Junior Member
  • ***
  • Posts: 661
Re: thread sealer for head bolts
« Reply #4 on: August 07, 2010, 01:59:50 am »
Well I hope I don't run into any more problems that is lol. The shortblock is new but I used my old heads hoping they would be ok with a valve seal and spring change and I ended up having some valves not seating right. Also replaced the transmisson when this motor when in and the pass side headgasket started leaking Into the no.4 cyl. Hopefully this time ill have better luck lol
Logged
86 k10 lwb 4x4:350 .040 214/224 444/466 112lsa performer rpm 1406 lt's summit racing th350 2800stall
03 yukon xl:tint debadge full boltons
86 ta:lm7 hot cam boltons

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: thread sealer for head bolts
« Reply #5 on: August 07, 2010, 05:40:21 am »
Can't remember what its for but I want to say the copper stuff is made for that. Someone please remind me What its made for lol
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19175
Re: thread sealer for head bolts
« Reply #6 on: August 07, 2010, 07:28:50 am »
What copper stuff?

Head bolts depending on type and location either require dry installation, dipped in motor oil, or thread sealant like permatex high temp thread sealant. Don't use pipe dope or rtv.

Sealants with copper are for high temp applications and work good on exhaust connections.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: thread sealer for head bolts
« Reply #7 on: August 07, 2010, 08:39:37 am »
Couldn't Remember what it was for but it came in a jar like anti seize. But it was copper the jar and paste
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline screamin86

  • Junior Member
  • ***
  • Posts: 661
Re: thread sealer for head bolts
« Reply #8 on: August 08, 2010, 07:59:46 pm »
no this was a permitex spray it wasnt a paste. got it fired up today and had a valve a lil too light at first but got it worked out and took her for a spin and that thing hauls lol sprung a leak from a trans cooler line though :/ gona post up a video of a idle rev with the new exhaust in a few mins in the performance section under my exhaust thread.
Logged
86 k10 lwb 4x4:350 .040 214/224 444/466 112lsa performer rpm 1406 lt's summit racing th350 2800stall
03 yukon xl:tint debadge full boltons
86 ta:lm7 hot cam boltons
Pages: [1]   Go Up
« previous next »