« previous next »
Pages: [1]   Go Down

Author Topic: NV4500 swap  (Read 3771 times)

Offline 75Chev

  • New Users
  • Posts: 2
NV4500 swap
« on: October 12, 2010, 06:48:50 pm »
Hey everyone. I'm swapping out the SM465 in my '75 chevy for a NV4500 5 speed out of an '88 chevy 1 ton pickup that had a 454.  Will the spline and size of the input shaft of the NV4500 be the same? Also, what about the bell housing? is it interchangeable?
Logged

Offline 1980c10

  • Senior Member
  • ****
  • Posts: 1205
Re: NV4500 swap
« Reply #1 on: October 12, 2010, 07:08:40 pm »
not too sure about most of that but you will need to modify the crossmember and most likely convert to a hydraulic clutch assembly. good luck and keep us posted of your progress
Logged

Offline 75Chev

  • New Users
  • Posts: 2
Re: NV4500 swap
« Reply #2 on: October 12, 2010, 07:25:43 pm »
I was told the NV4500 could be used with a manual clutch assembly?
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: NV4500 swap
« Reply #3 on: October 12, 2010, 08:04:43 pm »
I know the nv3500 93 and older you can swap bell housings with the 465. Here is some prices on a adapter plate if you wana keep the 465bell housing http://www.nv4500.com/product_info.php/cPath/3144/products_id/24275
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes
Pages: [1]   Go Up
« previous next »