Author Topic: Fuel Pump Push rod (Read 3414 times)

chevyman350_82 · « **on:** November 16, 2010, 02:19:10 pm »

Hi Guys I have a question I am putting a engine out of a 93 chevy c1500 in my 85 chevy truck and have no fuel...the engine out of the 93 did not have fuel pump so I bought the push rod and fuel pump for it...is the push rod the same?

screamin86 · « **Reply #1 on:** November 16, 2010, 02:20:49 pm »

The newer engine might night have a lobe on the cam for the fuel pump you may need to run a electric pump with a regulator.

chevyman350_82 · « **Reply #2 on:** November 16, 2010, 02:23:33 pm »

K. Thats what I was beging to think Because after all that time last night winding on it I figured I would have some fuel but thanks man!

chevyman350_82 · « **Reply #3 on:** November 16, 2010, 02:27:07 pm »

well on second thought when I had it on the stand and put the rod in I spun it over to find top dead center and I saw the rod moving...so I'm not sure

screamin86 · « **Reply #4 on:** November 16, 2010, 04:19:40 pm »

I'd still double check that but it could also be a bad fuel pump.

Captkaos · « **Reply #5 on:** November 16, 2010, 08:49:29 pm »

If the 93 motor has the stock cam in it, there is no lobe on the cam.

chevyman350_82 · « **Reply #6 on:** November 17, 2010, 07:05:14 am »

Thanks guys I put new fuel pump on it and it worked fine.

News:

Author Topic: Fuel Pump Push rod (Read 3414 times)

chevyman350_82

Fuel Pump Push rod

screamin86

Re: Fuel Pump Push rod

chevyman350_82

Re: Fuel Pump Push rod

chevyman350_82

Re: Fuel Pump Push rod

screamin86

Re: Fuel Pump Push rod

Captkaos

Re: Fuel Pump Push rod

chevyman350_82

Re: Fuel Pump Push rod