Bolt on link kit for bags?

[BBCurtiss]

So, I've been snooping around for a 4 link kit for a future project that i'm hopefully picking up this weekend, and if not, I WILL own another square body soon haha. But anyways, I've checked out Suicidedoors, they had nothing for out trucks. Also in Alberta if that means anything.

[Captkaos]

RideTech has the Airbar system.  N2TRUX on here is running it.

[VileZambonie]

Here's a few

http://www.ridetech.com/store/truck/?subcats=N&features_hash=V179

http://www.yourcustomcar.com/4-link-kit-kpc-bo4lc06-73-87-ck.html

http://store.gaugemagazine.com/73-87gm1500seriestruckbolt-on4linkandcantileverpackage.aspx

http://www.brotherstrucks.com/prodinfo.asp?number=4BK87SL%2DB

Stay away from clowns like this:

http://compare.ebay.com/like/270571214926?ltyp=AllFixedPriceItemTypes&var=sbar&rvr_id=185290393598&crlp=1_263602_304662&UA=%3F*I8&GUID=7493e0d412c0a0b3f8f63896fee1142f&itemid=270571214926&ff4=263602_304662

[acefoxx]

I got the Fatbars kit from NO LImits engineering with coilovers. It was the most complete yet affordable kit I could find.

http://www.nolimit.net/products.asp?dept=1011

[VileZambonie]

That's the same kit I got but I got it from Brothers because they have a 15% off deal.

[acefoxx]

I didn't get 15% off but due to a shipping error I got a second pair of the coilovers for free. Hiding in a box under my bed.

[repo]

sd has em they are listed under 4 link kits then click the kp brand. guage store link lister earlier is cheaper though.

[N2TRUX]

RideTech has the Airbar system.  N2TRUX on here is running it.

I can attest that the Ride Tech AirBar 4 link is a very nice system. The fit, finish and weld quality is awesome.

[VileZambonie]

I inquired to them as well for a coil over system and it was a lot more $$ but there's no doubt they have the best direct fit.

[royo]

Porterbilt has bolt in kits

[slammed79]

Kp Components has one of the best bolt in kits going, I got to eye hump a six link, cantilever kit on a 75 long bed the other day, a little spendy but apparently very easy to install. My buddy rolled his truck in the garage Friday night and drove it out Saturday at noon fully bagged and plumbed.

Bolt in kits and parts are common place now, the parts below ran my buddy 3k

KP cantilever w/ bolt in notches & Slam Specialties SS7 bags
AIM Control Arms & Slam Specialties SS7 Bags
2 Viar 380 Compressors
5 gal air tank
AIM air engine valve manifold
45 feet of braided 3/8 air line.
DJM drop spindles

This truck lays out on 22's with that setup