« previous next »
Pages: 1 [2]   Go Down

Author Topic: Planning the lift, have a few questions.  (Read 12811 times)

Offline Psycho71

  • Registered Users
  • *
  • Posts: 239
Re: Planning the lift, have a few questions.
« Reply #15 on: January 12, 2011, 07:29:05 am »
Measured my H1 take-offs (36x12.5x16.5) last night, and they come in right at 34" unmounted.
Logged
There are two tools needed, duct tape and WD40. If it moves and shouldn't, use the duct tape. If it doesn't move and should, use the WD 40.

Offline captain carnage

  • Registered Users
  • *
  • Posts: 143
Re: Planning the lift, have a few questions.
« Reply #16 on: January 12, 2011, 02:27:54 pm »
From my hub center to the bottom of my fender lip measures 26.25" and thats with a Rancho soft-ride 4" lift, and about 1/4 of an inch of shackle lift. I had to trim like a mad man to get my 35s on there.
Logged
Multiple chevys = neverending projects

Offline Psycho71

  • Registered Users
  • *
  • Posts: 239
Re: Planning the lift, have a few questions.
« Reply #17 on: January 12, 2011, 05:14:26 pm »
Quote from: captain carnage on January 12, 2011, 02:27:54 pm
From my hub center to the bottom of my fender lip measures 26.25" and thats with a Rancho soft-ride 4" lift, and about 1/4 of an inch of shackle lift. I had to trim like a mad man to get my 35s on there.

How wide of a wheel are u running? Backspace? Just curious?
Logged
There are two tools needed, duct tape and WD40. If it moves and shouldn't, use the duct tape. If it doesn't move and should, use the WD 40.

Offline captain carnage

  • Registered Users
  • *
  • Posts: 143
Re: Planning the lift, have a few questions.
« Reply #18 on: January 13, 2011, 12:54:46 am »
The wheels are 8" wide with the standard 3.75 backspacing. The tires are a narrow 12.5 wide.
Logged
Multiple chevys = neverending projects
Pages: 1 [2]   Go Up
« previous next »