« previous next »
Pages: [1]   Go Down

Author Topic: Easy way to remove front bumper  (Read 16909 times)

Offline JTESTER

  • Newbie
  • Posts: 23
Easy way to remove front bumper
« on: January 06, 2011, 01:17:36 pm »
i have an 83 gmc sierra classic and i need to take my front bumper off to primer the front of my fenders but i cant get it off, an suggestions to get it off?
Logged

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: Easy way to remove front bumper
« Reply #1 on: January 06, 2011, 01:20:28 pm »
Remove the bolts.
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.

Offline Da67goatman

  • Site Supporters
  • Junior Member
  • ******
  • Posts: 758
  • Burban
Re: Easy way to remove front bumper
« Reply #2 on: January 06, 2011, 01:22:41 pm »
Rubber BFH
Logged
<Pitcrew>
1989 R2500 Suburban mild 350 TBI 700r4 10.5" 14bolt 4.10 w/ 33s
1992 fullsize Blazer 4x4  35s no lift, 4.10s, Hella driving lights, TJ Flares, Huge bumpers, Snorkel, custom interior

Offline JTESTER

  • Newbie
  • Posts: 23
Re: Easy way to remove front bumper
« Reply #3 on: January 06, 2011, 02:52:37 pm »
sorry for not bein detailed, thats the problem the bolts are rusted up and they won't turn at all and i cant get a good angle on em to try and put some power into em
Logged

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: Easy way to remove front bumper
« Reply #4 on: January 06, 2011, 03:10:50 pm »
Soak them in PB Blaster
Logged

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: Easy way to remove front bumper
« Reply #5 on: January 06, 2011, 03:24:34 pm »
Get a short socket and a long breaker bar and tighten them til they snap. It will be easier in the long run.
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.

Offline hotrod24

  • Senior Member
  • ****
  • Posts: 1696
Re: Easy way to remove front bumper
« Reply #6 on: January 06, 2011, 04:40:28 pm »
You could also just unbolt the bumper brackets from the frame instead of unbolting the bumper from the bumper brackets  ;) and then when you have the bumper off take the bolts out or cut them off...
Logged
1980 1/2 ton shortbed project...
1978 pontiac grand prix...

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Easy way to remove front bumper
« Reply #7 on: January 06, 2011, 07:52:03 pm »
     
Quote from: hotrod24 on January 06, 2011, 04:40:28 pm
You could also just unbolt the bumper brackets from the frame instead of unbolting the bumper from the bumper brackets  ;) and then when you have the bumper off take the bolts out or cut them off...
     That way even if the bolts on the frame are rusted, you have space for leverage.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline jmj6879

  • Newbie
  • Posts: 19
Re: Easy way to remove front bumper
« Reply #8 on: January 13, 2011, 08:09:16 am »
Use an impact gun and take the bolts of at the frame. It's too easy to destroy the bumper with the impact but it should be pretty quick taking them off at the frame even if it's rusted. If that doesn't work, you can heat them first with a small propane torch if you have one or go all in and burn them out with an oxy/acytelene setup. But I'd be surprised if the impact didn't work.

Jake
Logged

Offline Laderhosen

  • Frequent Member
  • **
  • Posts: 272
Re: Easy way to remove front bumper
« Reply #9 on: January 13, 2011, 08:13:28 am »
Logged
'82 3/4 ton, 350, th400,
'88 K5 Blazer, 350, 700R4
’98 BMW 328i daily drive
’91 VW Golf Mk 2 with VR6 conv

Offline biscuit41

  • Newbie
  • Posts: 56
Re: Easy way to remove front bumper
« Reply #10 on: January 14, 2011, 08:51:06 pm »
Quote from: hotrod24 on January 06, 2011, 04:40:28 pm
You could also just unbolt the bumper brackets from the frame instead of unbolting the bumper from the bumper brackets
+1

It was easier removing all the bolts with the bumper off the truck.
Logged
1985 C10 Longbed

Offline Jim Rockford

  • Banned
  • Frequent Member
  • **
  • Posts: 358
Re: Easy way to remove front bumper
« Reply #11 on: January 16, 2011, 11:14:22 am »
plasma torch
Logged
1973 k20 Camper special
1980 k20 custom deluxe
2004 Crown Vic LX sport

Offline 87454westernhauler

  • Frequent Member
  • **
  • Posts: 453
Re: Easy way to remove front bumper
« Reply #12 on: January 31, 2011, 09:11:08 am »
chop saw angle grinder!!!!
Logged
86 c10 350 sbc 700R4 Daily Driver
79 gmc c20 350 th350
78 k1500 4x4 350 th350

Offline autorepr

  • Frequent Member
  • **
  • Posts: 401
Re: Easy way to remove front bumper
« Reply #13 on: January 31, 2011, 12:22:04 pm »
My personal fav, the red wrench. (Blow torch) I carefully take all kinds of stuff apart with it!
Logged
UH-OH  I'M GONNA NEED A BIGGER BANDAID!!!!!
Pages: [1]   Go Up
« previous next »