Author Topic: Ordering parts? (Read 3323 times)

spectreblazer · « **on:** January 10, 2011, 08:48:32 pm »

i have an 84 k20 with a c30 rear end 14 ff with a 6.2L

basically i need new

brake lines (all)

fuel lines (all on the frame)

body mounts (cab and front clip. have flat bed so i don't need rear)

engine parts (gasket set, stud girdle, bearings,etc, not a full fledged rebuild )

i've search and i'm having a hard time finding the right brake line kits (list only 2wd in oem) and the fuel lines.

this isn't a restoration so custom work does not bother me. i've thought about running my own fuel lines and brake lines (heard it was cheaper then buying oem) the problem is i don't know if summit would sell something like that or a similar site.

i know this site sells alot of metal replacement parts (i've purchased in the past and was pleased with the quality) . i don't know about all that other stuff. i guess i need to do some more searching but i thought i would ask to see if anyone else knew good places to buy replacement parts.

appreciate it

-dave

Irish_Alley · « **Reply #1 on:** January 10, 2011, 08:59:52 pm »

The lines you can get at a parts and you can get a re-ring kit for the engine come with piston rings to gaskets
While your there

chevyh20 · « **Reply #2 on:** January 10, 2011, 09:02:06 pm »

try inline tube, i just got all new brake and fuel lines from them.

Captkaos · « **Reply #3 on:** January 11, 2011, 03:47:01 pm »

This is where I get my stuff until I can get them as a Vendor.

brake lines (all) and fuel lines (all on the frame) Inlinetube.com or classictube.com

body mounts (cab and front clip. have flat bed so i don't need rear) P-S-T.com

engine parts (gasket set, stud girdle, bearings,etc, not a full fledged rebuild ) summitracing.com, jegs.com, or your local parts store.

You can get lengths of tube for fuel and brake, but you would have to have a flaring tool.

Jim Rockford · « **Reply #4 on:** January 12, 2011, 07:05:20 am »

You can buy various length fuel line and brake like stock from you local autoparts store, A real one like NAPA or car quest if you have one in your area. Not sure the vatozone or the like would have it. and you can get a tubing bender and make em yourself, Its a nice skill to learn vs just knowing how to order from a cataloge or website and bolt stuff on.

Irish_Alley · « **Reply #5 on:** January 12, 2011, 03:37:23 pm »

All parts store have fuel and brake line its just behind the counter

thirsty · « **Reply #6 on:** January 12, 2011, 04:18:30 pm »

I've never had the luxury of getting lines made up already.

Always made my own.

News:

Author Topic: Ordering parts? (Read 3323 times)

spectreblazer

Ordering parts?

Irish_Alley

Re: Ordering parts?

chevyh20

Re: Ordering parts?

Captkaos

Re: Ordering parts?

Jim Rockford

Re: Ordering parts?

Irish_Alley

Re: Ordering parts?

thirsty

Re: Ordering parts?