« previous next »
Pages: [1] 2   Go Down

Author Topic: 94 blower  (Read 19262 times)

Offline 76k104x4

  • Registered Users
  • *
  • Posts: 116
94 blower
« on: February 02, 2011, 09:38:39 pm »
any body ever tried or heard of putting a blower motor out of a 94 chevy pickup in our squarebodys i heard they move a lot more air than ours just wonderin if it would work i might try it tomorow
Logged

Offline 1980c10

  • Senior Member
  • ****
  • Posts: 1205
Re: 94 blower
« Reply #1 on: February 02, 2011, 11:15:10 pm »
post your results please.
Logged

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: 94 blower
« Reply #2 on: February 03, 2011, 08:47:36 am »
Yes, I just recently did that, and it was a direct swap for my 82. The 94 motor came with a new fan, so you won't need to re-use the old one. I'm guessing the 94 motor has a few more windings in it. It seems to have alot more power, and doesn't really cost any more. Go for it.
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 94 blower
« Reply #3 on: February 03, 2011, 08:48:58 am »
     That is good to know Grim, nice upgrade. :o
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: 94 blower
« Reply #4 on: February 03, 2011, 08:59:11 am »
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 94 blower
« Reply #5 on: February 03, 2011, 09:34:07 am »
     Just anouther reason I love this site, I know have a folder on my comp. that has about 20 files saved from threads on this foroum that as I rebuild my truck I want to include or do upgrades.  Cangrats to everyone for all the imformation here.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18454
    • http://www.73-87chevytrucks.com
Re: 94 blower
« Reply #6 on: February 03, 2011, 12:36:51 pm »
Fairly common swap that most don't ask about.
Logged

Offline 1980c10

  • Senior Member
  • ****
  • Posts: 1205
Re: 94 blower
« Reply #7 on: February 03, 2011, 04:50:37 pm »
I didn't know about it, now its on my list, thanks.
Logged

Offline bobcooter

  • Junior Member
  • ***
  • Posts: 788
  • 1979 Scottsdale C-20
Re: 94 blower
« Reply #8 on: February 04, 2011, 09:17:52 am »
Me too! My AC blows cold but it just never felt like it was blowing hard enough, even with a new fan.
Logged
'79 C-20, 350/400, 3:73 gears, 9 leafs and a headache rack
Favorite Quote, "Good judgement comes from experience. Experience comes from poor judgement."

Offline 1980c10

  • Senior Member
  • ****
  • Posts: 1205
Re: 94 blower
« Reply #9 on: February 28, 2011, 10:16:07 pm »
So the '94 motor doesn't match up to my '80 non a/c truck-the heater box is not deep enough. It does however match up to my '84 a/c truck. I may however modify the box at some point.
Logged

Offline 78 Chevyrado

  • Z62 ON-ROAD
  • Site Supporters
  • Senior Member
  • ******
  • Posts: 2748
    • My Photobucket Site
Re: 94 blower
« Reply #10 on: November 19, 2011, 07:47:17 pm »
Yep, old thread revival.  ;D

So I'm correct that this setup will work in an Original A/C equipped truck, like a '78 model?

Also what 94 do you order the fan for?  94 chevy truck WITH A/C, or Without?

Logged
Kenny

1978 C-20, 350/400, 3.73, Graystone Metallic, Raceline Renegade 8 Wheels - 18x8.5, 275/70R18 BFG KO's

Offline 76k104x4

  • Registered Users
  • *
  • Posts: 116
Re: 94 blower
« Reply #11 on: November 19, 2011, 11:35:30 pm »
i never got around to doing it i got busy with rust repair but im going to do it soon along with fix my AC
Logged

Offline Cody1018

  • Registered Users
  • *
  • Posts: 144
Re: 94 blower
« Reply #12 on: November 20, 2011, 08:40:20 am »
I had one of the newer blower motors in my truck. They do move a lot more air than the stock ones. Mine actually moved a little bit too much air and completely shattered the fan. Took it out in pieces and put a brand new stock one back in. This was probably my fault anyway cause i got it out of the junkyard. Worked nice for a couple days. Gave its life to warm up my hands one cold afternoon. May just order a new one for the 94, i do like it a lot better than the stock one.
Logged
1986 Chevy K10 Silverado

Offline Skunksmash

  • Senior Member
  • ****
  • Posts: 1398
Re: 94 blower
« Reply #13 on: November 26, 2011, 05:43:07 pm »
Quote from: 78 Chevyrado on November 19, 2011, 07:47:17 pm
Yep, old thread revival.  ;D

So I'm correct that this setup will work in an Original A/C equipped truck, like a '78 model?

Also what 94 do you order the fan for?  94 chevy truck WITH A/C, or Without?



Glad you revived it! Cause now I know about this. But yeah I have the same question as you. I would assume, that if you have AC, you'd get a fan off a 94 truck/burb/blazer that also had AC. Can anyone confirm? I have had a problem with this from day 1 with my truck. Makes a lot of noise on high, but doesn't move much air. I even looked at all the air plumbing and couldn't find anything that could be causing that much of a problem.
Logged

Offline 1MCP7.3/87GMC

  • Newbie
  • Posts: 44
  • 75s my baby
Re: 94 blower
« Reply #14 on: November 26, 2011, 06:22:16 pm »
Never heard of this but defiantly going to do this!!!
Logged
1984 Chevy Silverado 2wd swb (311hp 350) El Diablo Rojo
1975 Chevy Scottsdale 4wd swb  silver slug 350 tbi
1987 GMC Sierra 4wd lwb 350 stock replacement
Pages: [1] 2   Go Up
« previous next »