« previous next »
Pages: [1]   Go Down

Author Topic: 1984 Chevy Transfer Case Torque Specifications  (Read 3775 times)

Offline JRod1984

  • New Users
  • Posts: 1
1984 Chevy Transfer Case Torque Specifications
« on: February 20, 2011, 01:29:18 pm »
Hey guys, I've been looking around and can't find any specifications on how tight to tighten my fill and drain plugs on my np 208 transfer case. I've got a Chilton's manual but I can't find any info about that in there. Any help would be greatly appreciated.
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 1984 Chevy Transfer Case Torque Specifications
« Reply #1 on: February 20, 2011, 02:50:08 pm »
     I have never seen torque spec's on them.  I just tighten them until at least 3 full threads are in and until they feel tight and check for leaks.  Never had one leak before.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: 1984 Chevy Transfer Case Torque Specifications
« Reply #2 on: February 22, 2011, 07:11:53 pm »
Just tight. 
Logged

Online VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: 1984 Chevy Transfer Case Torque Specifications
« Reply #3 on: February 22, 2011, 07:14:23 pm »
18 lb-ft on the fill and drain plug. 30mm socket.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Pages: [1]   Go Up
« previous next »