« previous next »
Pages: [1]   Go Down

Author Topic: c10 newb in Va- 6 to 8 swap  (Read 4621 times)

Offline sl2xtc97

  • New Users
  • Posts: 1
c10 newb in Va- 6 to 8 swap
« on: March 20, 2011, 01:26:20 am »
Bought an 80 sumthin 4.3 shortbed. Fist mod to come, v8 swap. Any pointers on this swap would be much appreciated. Even the obvious stuff as i havnt picked it up yet. Are the trannies and rear in the 4.3 stout enough to keep in? Nice to meet you all, hope to gain some knowledge from everyone!
Logged

Offline 1982 Daily Driver

  • Junior Member
  • ***
  • Posts: 549
Re: c10 newb in Va- 6 to 8 swap
« Reply #1 on: March 20, 2011, 07:13:56 am »
Welcome to the site from South Carolina.
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7601
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: c10 newb in Va- 6 to 8 swap
« Reply #2 on: March 20, 2011, 07:21:56 am »
Welcome from NW Indiana.  Swap is pretty easy, your trans is fine.  You will need the V-8 frame engine mounts from a donor truck, other than that pretty much plug and play.  Use the search function, there are a couple of write ups on it.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline slammed79

  • Senior Member
  • ****
  • Posts: 1367
  • Thou shalt not drive stock
Re: c10 newb in Va- 6 to 8 swap
« Reply #3 on: March 20, 2011, 09:09:54 pm »
Welcome from AZ. I thought the 4.3 had the same mounts as a V8, they're the same architecture.
Logged
74 C10 Long bed 350/SM465 Lowered on 20's

Praise the lowered

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: c10 newb in Va- 6 to 8 swap
« Reply #4 on: March 20, 2011, 09:45:04 pm »
     Welcome from California
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7601
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: c10 newb in Va- 6 to 8 swap
« Reply #5 on: March 20, 2011, 10:47:20 pm »
Quote from: slammed79 on March 20, 2011, 09:09:54 pm
Welcome from AZ. I thought the 4.3 had the same mounts as a V8, they're the same architecture.

The frame brackets that the rubber mounts bolt to are different.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline slammed79

  • Senior Member
  • ****
  • Posts: 1367
  • Thou shalt not drive stock
Re: c10 newb in Va- 6 to 8 swap
« Reply #6 on: March 20, 2011, 10:54:24 pm »
Ah! Thanks for the clarification Zieg!
Logged
74 C10 Long bed 350/SM465 Lowered on 20's

Praise the lowered

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: c10 newb in Va- 6 to 8 swap
« Reply #7 on: March 21, 2011, 12:11:05 am »
Logged

Offline Canadian 4X4

  • Frequent Member
  • **
  • Posts: 421
Re: c10 newb in Va- 6 to 8 swap
« Reply #8 on: March 24, 2011, 05:42:18 pm »
Welcome!
Logged
Pages: [1]   Go Up
« previous next »