Author Topic: How wide can I go on my rear rims? And Transmission? (Read 6326 times)

jbell1 · « **on:** June 08, 2011, 02:48:33 pm »

hey everybody. Okay so currently me and my dad are building up the old 85 c20 we had out back so I'm down to two questions. First how wide a tire/rim can I go in the back? (I want almost like a drag stance big fat tires on the back small skinny in front). Secondly What is the best standard transmission I can use for the truck? currently we have the standard four gear granny, but we just dropped four grand on building a 350 for it not sure the hp im looking at but I want a good affordable trans preferably five or six speed. Thanks ahead of time!

Irish_Alley · « **Reply #1 on:** June 08, 2011, 04:47:14 pm »

nothings wrong with the 465 strong and dependable but if your looking for a od trans go with a nv3500 or nv4500

jbell1 · « **Reply #2 on:** June 08, 2011, 05:29:46 pm »

Yeah I've been talking to the nv4500 people I just didnt know if there was one i was missing. And anyone on the rim width? I wanna go as wide in the rear as possible without being illegal or touching anything, without flares or work. How much hp will the stock trans take?

three8six · « **Reply #3 on:** June 08, 2011, 05:49:56 pm »

I'd say 10 inch to stay reasonably in the wheel well etc...

Irish_Alley · « **Reply #4 on:** June 08, 2011, 06:05:51 pm »

like said i would go with 10s and maybe 12" tires and 8s up front

jbell1 · « **Reply #5 on:** June 08, 2011, 07:53:04 pm »

okay thanks and any recommendations on tires? Like I said I'm new to the game haha

jbell1 · « **Reply #6 on:** June 08, 2011, 08:35:42 pm »

alright well after looking at about 3 grand give or take for an nv4500 with kit im keeping the 465

big bear · « **Reply #7 on:** June 08, 2011, 10:02:10 pm »

lol...good choice man

Irish_Alley · « **Reply #8 on:** June 09, 2011, 08:49:23 am »

the nv3500 are cheaper

reload · « **Reply #9 on:** June 09, 2011, 10:12:09 am »

The SM465 will hold up to A LOT of abuse.

jbell1 · « **Reply #10 on:** June 09, 2011, 11:16:08 am »

Yeah i'm keeping the 465. It's only got like 30000 original miles on it anyway. I'll just go for the limited slip rear diff. Not staying with the open one anyone got any good recommendations for that? Thanks alot guys btw on the trans haha saved me alot of cash haha

slammed79 · « **Reply #11 on:** June 13, 2011, 11:58:13 am »

I've been finding some T56 6 speeds for about 1500 on Craigslist, but you'll have to swap your clutch over to hydraulic, which would need to happen with the NV4500 as well.

I'd run a 3.42 rear end with the sm465, you'll get decent mpgs and will be able to run on the freeway whilst keeping the rpms respectable.

Try www.ringandpinion.com to find what you're looking for in the diff.

jbell1 · « **Reply #12 on:** June 13, 2011, 03:27:51 pm »

Okay thanks

News:

Author Topic: How wide can I go on my rear rims? And Transmission? (Read 6326 times)

jbell1

How wide can I go on my rear rims? And Transmission?

Irish_Alley

Re: How wide can I go on my rear rims? And Transmission?

jbell1

Re: How wide can I go on my rear rims? And Transmission?

three8six

Re: How wide can I go on my rear rims? And Transmission?

Irish_Alley

Re: How wide can I go on my rear rims? And Transmission?

jbell1

Re: How wide can I go on my rear rims? And Transmission?

jbell1

Re: How wide can I go on my rear rims? And Transmission?

big bear

Re: How wide can I go on my rear rims? And Transmission?

Irish_Alley

Re: How wide can I go on my rear rims? And Transmission?

reload

Re: How wide can I go on my rear rims? And Transmission?

jbell1

Re: How wide can I go on my rear rims? And Transmission?

slammed79

Re: How wide can I go on my rear rims? And Transmission?

jbell1

Re: How wide can I go on my rear rims? And Transmission?