« previous next »
Pages: [1] 2   Go Down

Author Topic: Need a spindle nut retainer spring or a source to buy one?  (Read 11488 times)

Offline Mike Phillips

  • Junior Member
  • ***
  • Posts: 626
Need a spindle nut retainer spring or a source to buy one?
« on: October 19, 2011, 09:16:35 pm »
Need a spindle nut retainer spring or a source to buy one?

When I took my truck apart one side was missing the spindle nut retainer spring.

Here's what it looks like,



The bent tab on the end fits into the slot on the axle tube to prevent it from spinning.




Here's the spindle nut retainer spring, the key and the nut...



Here's where it goes on a GM Corporate 14 Bolt Rearend




Does anyone have a part number and a source for one of these parts?

This single part is keeping me from re-assembling one side of the rear brake and axle assemblies.

:)
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: Need a spindle nut retainer spring or a source to buy one?
« Reply #1 on: October 19, 2011, 09:26:38 pm »
It's a snap ring. What's the application?
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Mike Phillips

  • Junior Member
  • ***
  • Posts: 626
Re: Need a spindle nut retainer spring or a source to buy one?
« Reply #2 on: October 19, 2011, 09:42:15 pm »
Quote from: VileZambonie on October 19, 2011, 09:26:38 pm
It's a snap ring. What's the application?

The GM Corporate 14 bolt rearend in my new project truck...

1978 Chevy 3/4 Ton 4x4 Project Pavement Pounder





So far my local NAPA can't find one?

:)
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: Need a spindle nut retainer spring or a source to buy one?
« Reply #3 on: October 19, 2011, 09:55:57 pm »
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Mike Phillips

  • Junior Member
  • ***
  • Posts: 626
Re: Need a spindle nut retainer spring or a source to buy one?
« Reply #4 on: October 19, 2011, 10:21:29 pm »
Gee... I need to start visiting Autozone.com more often...

Thanks!

Can I buy you  beer?


:)
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: Need a spindle nut retainer spring or a source to buy one?
« Reply #5 on: October 19, 2011, 10:30:10 pm »
Yes  ;D
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Mike Phillips

  • Junior Member
  • ***
  • Posts: 626
Re: Need a spindle nut retainer spring or a source to buy one?
« Reply #6 on: October 19, 2011, 10:51:57 pm »
Cool.

Let me see what I can do...

Speaking of beer... I was in Germany two weeks ago as the guest of a major tool company and they took me to Octoberfest...

That's my beer next to my Canon Camera...


Never got her name but she sure is cute!


Colleages...


More cute German girls... as the night goes on everyone starts standing on the benches...


More cute German girls...


More cute German girls...


Monica


She wins the best leg contest...



Met her at the airport on the way home... she wins best leg contest too...




Oh yeah... beer was good too...

:)
« Last Edit: October 19, 2011, 10:59:05 pm by Mike Phillips »
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: Need a spindle nut retainer spring or a source to buy one?
« Reply #7 on: October 19, 2011, 10:54:27 pm »
Monica, Beer wenches and beer. Sounds like a good time!
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Mike Phillips

  • Junior Member
  • ***
  • Posts: 626
Re: Need a spindle nut retainer spring or a source to buy one?
« Reply #8 on: October 22, 2011, 10:12:13 am »
Bad news...

My guy at NAPA can't find one and I called Autozone and they say it's a discontinued part number...

Ugh...

Hey buddy... can you spare a retaining clip?


:)
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: Need a spindle nut retainer spring or a source to buy one?
« Reply #9 on: October 22, 2011, 11:28:02 am »
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Mike Phillips

  • Junior Member
  • ***
  • Posts: 626
Re: Need a spindle nut retainer spring or a source to buy one?
« Reply #10 on: October 22, 2011, 12:41:19 pm »
Ha ha...

Was just heading to eBay...

Thanks, will order right now.  Have to go to SEMA for an entire week so I probably won't get a chance to install it till I get back.  Until then I have the rear axles all cleaned up and ready to install...









Thank you!

Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Need a spindle nut retainer spring or a source to buy one?
« Reply #11 on: October 22, 2011, 07:01:24 pm »
When I went to bush gardens on my wifes senor trip I didn’t know it was anheuser bush’s park but they have Oktoberfest all year lol being a chaperon for the school it was founded apron about me drinking I was supposed to be setting an example for the kids I was watching lol. Then irish part of the park really got my going also we where watching the river dancers and I was screaming and cheering for them but I was the only one so that got me bad looks also lol
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline slammed79

  • Senior Member
  • ****
  • Posts: 1367
  • Thou shalt not drive stock
Re: Need a spindle nut retainer spring or a source to buy one?
« Reply #12 on: October 22, 2011, 08:16:46 pm »
Have to go to SEMA he says... like its a chore. I envy you Mike!
Logged
74 C10 Long bed 350/SM465 Lowered on 20's

Praise the lowered

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Need a spindle nut retainer spring or a source to buy one?
« Reply #13 on: October 23, 2011, 01:35:13 am »
mike i have to ask but do you use your leg as a ice breaker? sure do meet allot of attractive women, just thinking of the first things that you might say “ wow I thought my leg was nice but you have me beat
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Mike Phillips

  • Junior Member
  • ***
  • Posts: 626
Re: Need a spindle nut retainer spring or a source to buy one?
« Reply #14 on: October 23, 2011, 10:15:28 pm »
Quote from: slammed79 on October 22, 2011, 08:16:46 pm

Have to go to SEMA he says... like its a chore. I envy you Mike!


It's a lot of fun but it's serious.  There's two ways to go to SEMA, one is working the show the other is to go for fun.  I'm there to work and it's a fun job to work but it's a time to be very serious and professional in all dimensions.



Logged
Pages: [1] 2   Go Up
« previous next »