« previous next »
Pages: [1] 2   Go Down

Author Topic: Shaved locks and handles?  (Read 9760 times)

Offline pendergraft2111

  • Newbie
  • Posts: 49
  • It's on my to do list
Shaved locks and handles?
« on: January 31, 2012, 04:59:40 pm »
I am trying to keep a flat look on my truck and I am avoiding chrome like the plague. I have boiled it down to 2 options... Paint my handles or shave them. What do you think?

I checked the store here and didn't find a kit. Can you recommend one? pound rating? My door is all electric right now. I checked airbagit.com and I am looking at about 100$
Logged
When life gives you lemons... find someone who wants lemons, sell them and buy what you want.

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: Shaved locks and handles?
« Reply #1 on: January 31, 2012, 05:07:47 pm »
Are you planning on driving it often?  If the answer is yes, avoid shaved handles.  I had them for 8 years and after 3 I hated them.
Logged

Offline pendergraft2111

  • Newbie
  • Posts: 49
  • It's on my to do list
Re: Shaved locks and handles?
« Reply #2 on: January 31, 2012, 06:33:45 pm »
I have a company truck so weekends when the whole family isn't going... let's say rarely... lol
Logged
When life gives you lemons... find someone who wants lemons, sell them and buy what you want.

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: Shaved locks and handles?
« Reply #3 on: January 31, 2012, 07:07:27 pm »
I agree with captn, it looks cool on some rides but is a pita. I have them on my stepside and have to get in through the vent window because they stopped working and I haven't had time to diagnose. I'm keeping locks and handles on my 74 but smoothed everything else. Do you like black chrome?
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Shaved locks and handles?
« Reply #4 on: January 31, 2012, 08:52:16 pm »
i have them on my 79 and like the others i hate them. one time one of the relays froze on and caused a little problem. other times if its to cold the will freeze up lucky i kind of have long arms and legs so reaching threw the vent isnt to hard on a lifted truck
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Bitzer!

  • Junior Member
  • ***
  • Posts: 906
  • Smiles per gallon
Re: Shaved locks and handles?
« Reply #5 on: February 04, 2012, 04:15:18 pm »

I've gone for the shaved look. I'm not a chrome lover and the handles I had were ugly and had outlived there looks. Gone for the popper kit as the truck will be high days and holidays so it's not so much of a problem.
Logged
1979 GMC CrewCab  C20 1t
454 750 Holley,TH350, 14bolt diff fully floating
Why aren't there 8 days in a week!
A K5 rolling shell *new addition*

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Shaved locks and handles?
« Reply #6 on: February 05, 2012, 09:51:19 am »
Here's a pic of mine.

I also paid the extra few bucks for black door locks from Auto Zone. Within a year the black had worn off!!!
Overall pic.

All the stainless or chrome is painted. Its chipped off the stainless trim around the grill. One of these days I will redo that!
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Shaved locks and handles?
« Reply #7 on: February 05, 2012, 10:28:18 am »
     I am with everyone else.  I would only put them on a show vehicle that was made to draw attention to it.  I deal with electrical all day long, and I have learned, the more electronics that are on one item, the more chances 1 or more of the systems could have a problem.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline pendergraft2111

  • Newbie
  • Posts: 49
  • It's on my to do list
Re: Shaved locks and handles?
« Reply #8 on: February 05, 2012, 01:20:12 pm »
It's clearly leaning one way... has anyone ever used this PlastiDip stuff they sell at homedepot. It's like spray on vinyl and a lot of people are using it to paint their rims... It may be an option
Logged
When life gives you lemons... find someone who wants lemons, sell them and buy what you want.

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Shaved locks and handles?
« Reply #9 on: February 05, 2012, 03:27:57 pm »
Acrylic enamel on mine.
Ground the chrome with 36 grit grinding wheel, and a pointed bit on a die grinder. Sprayed it with self etching primer, and urethane primer. Sanded every square inch of them with 320 grit sand paper, and sprayed with activated acrylic enamel. Then re assembled the push button into them.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline black85k10

  • Newbie
  • Posts: 41
Re: Shaved locks and handles?
« Reply #10 on: February 06, 2012, 01:22:30 pm »
They are not shaved but one day on gears on spike tv. they had a kit that you could get to weld in to make the door handles flat. Kindig - Smooth Door Handles are the name of them.
Logged
85 chevy k-10 350 th400

Offline black85k10

  • Newbie
  • Posts: 41
Re: Shaved locks and handles?
« Reply #11 on: February 06, 2012, 01:32:07 pm »
just went and looked them up. they are a little on the pricey side i think
Logged
85 chevy k-10 350 th400

Offline winky

  • Junior Member
  • ***
  • Posts: 509
Re: Shaved locks and handles?
« Reply #12 on: February 06, 2012, 02:39:32 pm »
Quote from: black85k10 on February 06, 2012, 01:22:30 pm
They are not shaved but one day on gears on spike tv. they had a kit that you could get to weld in to make the door handles flat. Kindig - Smooth Door Handles are the name of them.

http://www.kindigit.com/store.php  ;)
Logged

Offline 1979C20

  • Senior Member
  • ****
  • Posts: 1659
  • Kyle Taulton.
Re: Shaved locks and handles?
« Reply #13 on: February 06, 2012, 03:06:26 pm »
Those are sexy.
Logged
1979 SCLB C20 Q-jet 350 SM465 14b F.F. 4.10 G80
1989 GMC Suburban V2500 TBI350 TH400 4in lift 35's 14b SF

Offline pendergraft2111

  • Newbie
  • Posts: 49
  • It's on my to do list
Re: Shaved locks and handles?
« Reply #14 on: February 06, 2012, 04:05:01 pm »
I really like those handles... thanks for adding something new to the wishlist but at around 600 they are near the bottom of the list...lol
Logged
When life gives you lemons... find someone who wants lemons, sell them and buy what you want.
Pages: [1] 2   Go Up
« previous next »