« previous next »
Pages: [1] 2   Go Down

Author Topic: Something went bang!  (Read 8823 times)

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Something went bang!
« on: February 16, 2012, 06:31:22 pm »
Guy I know owns a prefab house place in the town I live in. He builds sides on palettes and fills them with all the scraps. I got ten of them tonight for use in the arch making maple syrup. I towed the trailer over to my buddies house that has the sap house. I got almost to the top of his driveway and something in the rear end went bang!!! Right rear axle is walking out of the housing. Parked it, he gave me a ride home. Will have to go pull the cover tomorrow night!!!
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline Donut

  • Frequent Member
  • **
  • Posts: 402
Re: Something went bang!
« Reply #1 on: February 16, 2012, 06:49:19 pm »
Stinks, but could have been worse.  You could have been on the road instead...
Logged
'73 Chevy K-20 ***SOLD***
350/tbh350/np205
My plow was half price if i took the truck with it.

'86 C-30 dually, 454/tbh400

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Something went bang!
« Reply #2 on: February 16, 2012, 07:11:17 pm »
Oh I know that!!
Just a not real loud bang, no crunchy crunchy, or grinding afterward or anything! I backed the trailer down his driveway. unhooked, and drove it back to the top in front x4 .
 I am hoping it just sheared the axle off. I have replaced both axles in the past because the splines were twisted to the point that they were offset from the part of them that wasn't in the spider gears. It has a gov lock, and its has always worked very well.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline thirsty

  • Senior Member
  • ****
  • Posts: 1289
    • Suitor's Garage
Re: Something went bang!
« Reply #3 on: February 16, 2012, 07:53:02 pm »
Just finished up my rear end tonight from one of those bangs.
Logged
Real trucks are built, not bought Build thread

Give me a long enough lever and a place to stand, and I shall move the earth or break this bolt...Whatever, just hold my beer!

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Something went bang!
« Reply #4 on: February 17, 2012, 05:47:15 am »
Quote from: Donut on February 16, 2012, 06:49:19 pm
Stinks, but could have been worse.  You could have been on the road instead...

     Thankfully you were not doing 60 + when it happened, now that would have sucked.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline fitz

  • Senior Member
  • ****
  • Posts: 2085
Re: Something went bang!
« Reply #5 on: February 17, 2012, 03:30:07 pm »
Was this in yellow snow?
I have a spare 14 bolt SF with 4.10'S.
If you need it its yours.
Logged

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Something went bang!
« Reply #6 on: February 17, 2012, 08:03:37 pm »
Yes in Yellow Snow. It has 3:42s.
 I Have another rear in a C20 thats 3:42 ratio, but I don't really want to disable that truck.
I pulled the cover tonight. Its just the right side axle snapped off outside the spider gear.
I picked up a pair of axles, 14 bolt SF, and a 10 bolt from a guy I grew up with tonight. 3:73 ratio. I'm just going to rob the axle for now. Think this summer I will swap in the front end, and swap over my knuckles as they have all new ball joints, and my axles as I bought them brand new last year from Randy's ring and Pinion. 40% stronger than stock. I have a 3:73 FF rear end I pulled out of one of my mid 70's rigs years ago. I will do all new brakes on it and put it in the rear.

I priced an axle today. $458 from GM, and $315 from Randy's Ring and Pinion.
« Last Edit: February 17, 2012, 08:07:14 pm by Blazin »
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Something went bang!
« Reply #7 on: February 18, 2012, 06:29:45 am »
Quote from: fitz on February 17, 2012, 03:30:07 pm
Was this in yellow snow?

Quote from: Blazin on February 17, 2012, 08:03:37 pm
Yes in Yellow Snow.

     Ok you 2, I know the joke when you are a kid about not eating yellow snow, but this has to be something different.  Is this a east coast thing ?  Enlighten me please.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline thirsty

  • Senior Member
  • ****
  • Posts: 1289
    • Suitor's Garage
Re: Something went bang!
« Reply #8 on: February 18, 2012, 08:34:15 am »
You can see the famous yellow snow plow rig behind the magnum.
Logged
Real trucks are built, not bought Build thread

Give me a long enough lever and a place to stand, and I shall move the earth or break this bolt...Whatever, just hold my beer!

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Something went bang!
« Reply #9 on: February 18, 2012, 08:56:23 am »
This is Yellow Snow.


This is why its called yellow Snow!

Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Something went bang!
« Reply #10 on: February 19, 2012, 08:08:35 am »
      Sorry I knew that, just forgot you nicknamed your truck yellow snow.  ???   I guess my mind was off in a different area wondering what in the heck actual yellow snow could mean. ;D
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Something went bang!
« Reply #11 on: February 19, 2012, 08:35:34 am »
I found what went bang!!


Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Something went bang!
« Reply #12 on: February 19, 2012, 08:37:21 am »
     Was that the outer spline part of the axle ?
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline thirsty

  • Senior Member
  • ****
  • Posts: 1289
    • Suitor's Garage
Re: Something went bang!
« Reply #13 on: February 19, 2012, 09:01:24 am »
Good thing you have access to a few chevy parts Blazin'.  ;D
Logged
Real trucks are built, not bought Build thread

Give me a long enough lever and a place to stand, and I shall move the earth or break this bolt...Whatever, just hold my beer!

Online zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Something went bang!
« Reply #14 on: February 19, 2012, 09:04:57 am »
Boy did you luck out on that... That chunk could have wiped out the ring and pinion if given the chance, not to mention if the axle walked out...
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/
Pages: [1] 2   Go Up
« previous next »