« previous next »
Pages: [1] 2 3 ... 5   Go Down

Author Topic: Project "BurnEm"  (Read 33277 times)

Offline 454Man

  • Senior Member
  • ****
  • Posts: 1027
  • Why Race?
Project "BurnEm"
« on: February 25, 2012, 08:20:26 pm »
Just got it yesterday about 12am. Stayed up all night washin and waxin it to bring the color back. "See pics. Its an 82 lwb 1/2. Painted grey nice seats, dash, headliner, wheels, and tires. The engine is locked up probably from when it overheated. Its a 305 with a th350. My plan is to take out the current eng/trans combo and replace them with a 350 with a comp cams high energy cam 260 and another th350 or a 700r 4. Idk if the drive shaft lenght will work for the 700, but that's the trans id rather have because of o.d.
« Last Edit: February 28, 2012, 11:12:17 am by 454Man »
Logged

Offline 454Man

  • Senior Member
  • ****
  • Posts: 1027
  • Why Race?
Re: Project "BurnEm"
« Reply #1 on: February 25, 2012, 08:23:36 pm »
Waxin tryin to bring back the color at 1:32 am
Logged

Offline 454Man

  • Senior Member
  • ****
  • Posts: 1027
  • Why Race?
Re: Project "BurnEm"
« Reply #2 on: February 25, 2012, 08:26:26 pm »
General pics
Logged

Offline 454Man

  • Senior Member
  • ****
  • Posts: 1027
  • Why Race?
Re: Project "BurnEm"
« Reply #3 on: February 25, 2012, 08:27:35 pm »
More
Logged

Offline 454Man

  • Senior Member
  • ****
  • Posts: 1027
  • Why Race?
Re: Project "BurnEm"
« Reply #4 on: February 25, 2012, 08:28:48 pm »
Pic
Logged

Offline firefighter

  • Frequent Member
  • **
  • Posts: 462
Re: Project "BurnEm"
« Reply #5 on: February 25, 2012, 08:33:08 pm »
Looking good !!

I can relate. Working on a new vehicle into the wee hours of the morning.
Ahhhhh yes... the excitement of a new vehicle.

Although now that I'm almost 50, I get excited staying up till 10 oclock. Ha Ha !!!    ;D
Logged

Offline 454Man

  • Senior Member
  • ****
  • Posts: 1027
  • Why Race?
Re: Project "BurnEm"
« Reply #6 on: February 25, 2012, 08:40:37 pm »
Yep I had a couple beers and free time so why not make use of time and clean up the truck. Now here's my ???. this sticker states the truck came with a 4 speed auto. But by looking under the truck I can see its a th350. Should I go and get a 700r-4? I think one trans is shorter than the other if I'm correct.
Logged

Offline 87454westernhauler

  • Frequent Member
  • **
  • Posts: 453
Re: Project "BurnEm"
« Reply #7 on: February 25, 2012, 08:50:20 pm »
look at the pan on the transmission and look where the shift module is. a 700r 4 trans has a square pan, the th350 trans has the shift module on the back and a th400 has the shift module on the side of the trans.
Logged
86 c10 350 sbc 700R4 Daily Driver
79 gmc c20 350 th350
78 k1500 4x4 350 th350

Offline 454Man

  • Senior Member
  • ****
  • Posts: 1027
  • Why Race?
Re: Project "BurnEm"
« Reply #8 on: February 25, 2012, 08:53:31 pm »
Sticker
Logged

Offline 454Man

  • Senior Member
  • ****
  • Posts: 1027
  • Why Race?
Re: Re: Project "BurnEm"
« Reply #9 on: February 25, 2012, 08:55:02 pm »
Quote from: 87454westernhauler on February 25, 2012, 08:50:20 pm
look at the pan on the transmission and look where the shift module is. a 700r 4 trans has a square pan, the th350 trans has the shift module on the back and a th400 has the shift module on the side of the trans.
The trans pan is square with one corner that's a 45 degree angle
Logged

Offline 87454westernhauler

  • Frequent Member
  • **
  • Posts: 453
Re: Project "BurnEm"
« Reply #10 on: February 25, 2012, 09:19:59 pm »
ok thats a th350 then ;). 
Logged
86 c10 350 sbc 700R4 Daily Driver
79 gmc c20 350 th350
78 k1500 4x4 350 th350

Offline 454Man

  • Senior Member
  • ****
  • Posts: 1027
  • Why Race?
Re: Re: Project "BurnEm"
« Reply #11 on: February 25, 2012, 09:23:46 pm »
Quote from: 87454westernhauler on February 25, 2012, 09:19:59 pm
ok thats a th350 then ;).
I just started a new thread in the engine and drivetrain section. About the th350 and 700r4
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Project "BurnEm"
« Reply #12 on: February 26, 2012, 06:34:22 am »
     Well that looks like a great start to a build.  Hopefully you got it cheap enough with the seized engine.  I love to get trucks that way, they are cheap and really only need an engine if you are lucky.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline 454Man

  • Senior Member
  • ****
  • Posts: 1027
  • Why Race?
Re: Project "BurnEm"
« Reply #13 on: February 26, 2012, 08:14:40 am »
This is the tuck before I got to wax it... paid like 600 for it
« Last Edit: March 05, 2012, 07:16:25 pm by 454Man »
Logged

Offline 87454westernhauler

  • Frequent Member
  • **
  • Posts: 453
Re: Project "BurnEm"
« Reply #14 on: February 26, 2012, 10:58:30 am »
man u guy in the south are so lucky!!!! ;D ;D ;D
Logged
86 c10 350 sbc 700R4 Daily Driver
79 gmc c20 350 th350
78 k1500 4x4 350 th350
Pages: [1] 2 3 ... 5   Go Up
« previous next »