« previous next »
Pages: [1]   Go Down

Author Topic: what backspacing?  (Read 3031 times)

Offline daman02

  • Newbie
  • Posts: 69
what backspacing?
« on: March 25, 2006, 06:57:00 pm »
i need to know what backspacing i will need on my 86 2wd silverado to get a 9" wheel perfectly flush with the fender but just enough inside where it will miss the lip of my front fender.  i know if i get the same backspacing for the back i'll have to use a little spacer so i'm looking for the front backsapcing

Logged
'86 C10 Silverado 350 with 700r4 and 2500 stall
Dropped 2" in front and 2" in rear but soon to b 4" in rear
18x10 wheels with 295/45 18 tires

Offline RSBAD454

  • Junior Member
  • ***
  • Posts: 533
Re: what backspacing?
« Reply #1 on: March 26, 2006, 10:56:00 pm »
well, if you have a 8" rim with a 4 1/2" back spacing(stock)....just add an axtra inch to the back spacing. Are you lowered and or are you using bigger than 15" rims?

Toys are my game

Logged
“If you're listening to a rock star in order to get your information on who to vote for, you're a bigger moron than they are.”
http://prosites-prs.homestead.com/
http://

Offline daman02

  • Newbie
  • Posts: 69
Re: what backspacing?
« Reply #2 on: March 27, 2006, 05:43:00 pm »
it will have a 2/4 drop on it and i'm using 18" wheels with 295/45/18 tires which are 28.5 inches tall.  it's not a big deal if i can't find the measurement cuz all i gotta do is pull the wheel.  i was just tryin to take the easy way out.  

Logged
'86 C10 Silverado 350 with 700r4 and 2500 stall
Dropped 2" in front and 2" in rear but soon to b 4" in rear
18x10 wheels with 295/45 18 tires
Pages: [1]   Go Up
« previous next »