Aligning barn doors....

[1979C20]

It seems as though the only adjusting that can be done on the barn doors is in and out. I need my driver side door to rotate clockwise and eighth inch and move right some. I also think it needs to go down a bit. I couldnt tell you why they are so misaligned.... What kind of adjusting can be done on them?

[Captkaos]

What year Suburban?  There should be some adjustment in the mounting bolts for tilt.

[1979C20]

Its my 89. The only adjustment i can see are the bolta where the hing mounts to the body and to the door. 3 bolts on each side of all 4 hinges. Geometrically speeking, i can only adjust the doors in and out, but not left or right.

[PromiseKeeper]

Is there some slop in the hinge pins? It almost sounds like you have some sag going on. New bushings may be in order

[1979C20]

There is no slop or sag at all. Ive tried lifting tge diors and it move the whole truck.

[PromiseKeeper]

I'd try some shims behind the hinges and see what happens

[1979C20]

I think it would be quite difficult to get a shim in there. Although, I was able to adjust it a little bit by pulling down on the top of the door. Now I just need to adjust it in some and adjust the strikers. Thanks guys.