« previous next »
Pages: [1]   Go Down

Author Topic: Amount of Hassle.  (Read 4632 times)

Offline 78chevyshortbed

  • Newbie
  • Posts: 14
  • Newbie
Amount of Hassle.
« on: December 12, 2012, 02:47:43 pm »
i have a 1978 Chevy Fleetside with a 4 inch suspension lift and a 3 inch body lift. im thinking about switching over to just a 6 inch suspension lift and i was wondering if you guys have went through this and if you could inform me on how much hassle it would be to switch all the steering and drive shaft and all the stuff over. Thanks.
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Amount of Hassle.
« Reply #1 on: December 12, 2012, 06:28:09 pm »
     If you order the 6" kit with the raised steering arm and shocks, not much hassle at all.  You can di it over the weekend or on a Saturday if you stayed on it.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: Amount of Hassle.
« Reply #2 on: December 12, 2012, 06:33:15 pm »
Are you ditching the body lift?
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 78chevyshortbed

  • Newbie
  • Posts: 14
  • Newbie
Re: Amount of Hassle.
« Reply #3 on: December 12, 2012, 06:35:48 pm »
If I was going to go with the 6 inch suspension then yes I was going to ditch the body lift.
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Amount of Hassle.
« Reply #4 on: December 12, 2012, 06:38:22 pm »
Quote from: 78chevyshortbed on December 12, 2012, 06:35:48 pm
If I was going to go with the 6 inch suspension then yes I was going to ditch the body lift.

     In my opinion it would look better, but I don' like body lifts.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline 78chevyshortbed

  • Newbie
  • Posts: 14
  • Newbie
Re: Amount of Hassle.
« Reply #5 on: December 12, 2012, 06:41:50 pm »
If I was just going to keep the 4 inch suspension and 3 inch body I was going to cut the body lift down to 1 and 1/2 inches, but I like the looks of a 6 inch suspension lift better by itself.
Logged
Pages: [1]   Go Up
« previous next »