« previous next »
Pages: [1]   Go Down

Author Topic: blinker question  (Read 6755 times)

Offline mikesantos

  • Newbie
  • Posts: 15
  • Newbie
blinker question
« on: March 23, 2013, 03:09:16 pm »
hello..

My blinkers have done goofy things since I bought the my 1983 c10 a few months ago.  both blinker worked sometimes but the funny thing is when they were blinking, it would get stuck and stop blinking but just light up a solid color.  it would do this with the right and left blinker, blink normally and then stop blinking yet stay lighted up.  I just lived with it.  finally today it just stopped blinking all together.  but when you put the blinker on either left or right, it stays illuminated but does not blink on or off.  I thought maby this was chevy's way of saying i have some bulbs blown out.  I know newer trucks like my 95 it will blink rappidly.  I changed all bulbs on both tailights that were out and they are working now but still no blinking light.  I'm sure something has gone out with the truck's old age.  Any suggestions as to what is causing this malfunction?
Logged
--
Coleen - 1995 Cheyenne
Amber - 1983 - C10 Custom Deluxe

Offline Jason S

  • Senior Member
  • ****
  • Posts: 1561
Re: blinker question
« Reply #1 on: March 23, 2013, 04:18:19 pm »
Have you tried swapping out the turn signal flasher? It's on the fuse panel.
Logged
1973 GMC K2500, Super Custom, Camper Special, 350, TH350, NP203, 4.10's
1974 Chevrolet K10, Custom Deluxe, 350, SM465, NP203, 3.73's

"1) Peace through strength; 2) Trust but verify; 3) Beware of evil in the modern world"

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6627
Re: blinker question
« Reply #2 on: March 23, 2013, 07:50:57 pm »
Quote from: Jason S on March 23, 2013, 04:18:19 pm
Have you tried swapping out the turn signal flasher? It's on the fuse panel.

X2
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline mikesantos

  • Newbie
  • Posts: 15
  • Newbie
Re: blinker question
« Reply #3 on: March 23, 2013, 10:12:43 pm »
no i have not.  but I will look into it tomorrow.  where is the location of the fuse panel? also its interesting, the hazard blinkers work fine.  thank you for the suggestion.
Logged
--
Coleen - 1995 Cheyenne
Amber - 1983 - C10 Custom Deluxe

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6627
Re: blinker question
« Reply #4 on: March 23, 2013, 10:56:18 pm »
Quote from: mikesantos on March 23, 2013, 10:12:43 pm
...where is the location of the fuse panel? also its interesting, the hazard blinkers work fine....

Fuse panel is behind the dash against the firewall, all the way to the left.  It's easily seen and obvious.  There are two flashers; one for turn, one for hazard lights.  Try swapping them.  The symptoms will follow the bad flasher.
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline mikesantos

  • Newbie
  • Posts: 15
  • Newbie
Re: blinker question
« Reply #5 on: March 23, 2013, 11:59:12 pm »
okay thanks for the help
Logged
--
Coleen - 1995 Cheyenne
Amber - 1983 - C10 Custom Deluxe

Offline mikesantos

  • Newbie
  • Posts: 15
  • Newbie
Re: blinker question
« Reply #6 on: March 25, 2013, 07:52:25 pm »
once again thank you for your help.  I just replaced both of them.  works great now!!
Logged
--
Coleen - 1995 Cheyenne
Amber - 1983 - C10 Custom Deluxe

Offline pholliday1

  • Junior Member
  • ***
  • Posts: 632
  • 1990 V3500 Crew Cab
Re: blinker question
« Reply #7 on: March 25, 2013, 08:46:28 pm »
And BD fixes yet another electrical problem! To bad you weren't getting paid for each problem you've solved you'd be RICH! I speak for everyone that you've helped when I say thanks!
Logged
VETERAN AND LIFETIME NRA MEMBER. WHAT DO YOU STAND FOR?
1991 V3500 CREWCAB SRW 454TBI GMC
1991 v3500 crewcab SRW 454tbi 480le 6" lift
1990 V3500 crewcab Dana 60 FF 14b 5:38 ratio 40 inch 11" lift
1989 v3500 crewcab 454TBI 5" lift

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6627
Re: blinker question
« Reply #8 on: March 25, 2013, 09:09:41 pm »
LOL - Jason S gets the credit for this one!!  I just followed his lead!

And, in case you haven't noticed in my signature, I am Rich!   ;D
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline Jason S

  • Senior Member
  • ****
  • Posts: 1561
Re: blinker question
« Reply #9 on: March 25, 2013, 10:16:47 pm »
Thank you for the kind response bd...  However you're usually the one getting down to the right answer...   :)
Logged
1973 GMC K2500, Super Custom, Camper Special, 350, TH350, NP203, 4.10's
1974 Chevrolet K10, Custom Deluxe, 350, SM465, NP203, 3.73's

"1) Peace through strength; 2) Trust but verify; 3) Beware of evil in the modern world"
Pages: [1]   Go Up
« previous next »