Where to place Sierra 2500 fender decals for my 86'

[cwest]

I got some Sierra 2500 fender decals hot off of ebay for my 86'.  Does anyone know the exact dimensions of where I should place them?  I have an idea and could definitely eye ball it, but I figure why not be spot on.  From what I can tell, decals placed by the factory look to be about 2'' away from the rear of the fender and 1-2'' under the bend in the fender.  Thanks for any input.

[Captkaos]

Did you find the information you were looking for?

[cwest]

Nope, I was hoping someone knew off the top of their head on here

[Captkaos]

What you posted was close from what I remember.  If you email me in the morning I will check.

[cwest]

Wouldn't hurt, thanks.  I assume you have a truck with original fender decals?

[cwest]

So I went with 3" from the rear of the panel, and 1.5"(the lettering) below the bend, just in case anyone was wondering.  It looks pretty good.  Also, a piece of advise.. Read the instructions on the adhesive before you do anything like I didn't.  I had some leakage from behind the emblem directly after placement and didn't wipe it off immediately like the instructions say to do.. Yea, that stuff eats paint

[VileZambonie]

Pics?

[cwest]

I tried to attach some pics but its saying the files are too big, and i would have to pay for a file converter program.  If you have any suggestions of how to post a pic within the file size restrictions I'm all ears.

[werewolfx13]

You can resize for free with paint.

[VileZambonie]

Free program -works great

http://download.cnet.com/IrfanView/?part=dl-IrfanView&subj=dl&tag=button

[Stewart G Griffin]

It's probably too late, but in the future if you need reference i think this is a good source:

http://brochures.slosh.com/


P.S.  In fact, i just learned from that site that a 3/4 chassis cab with dual wheels was available in for 73.

[cwest]

Thanks for the website, looks like we're cooking with grease now.  Here's a couple pics