« previous next »
Pages: [1]   Go Down

Author Topic: 250/3sp to 350/TH350 swap  (Read 2113 times)

Offline LaCamionetaGris

  • New Users
  • Posts: 1
  • Newbie
250/3sp to 350/TH350 swap
« on: August 29, 2013, 07:19:42 pm »
I have an 80 SWB with a I6 and 3 on the tree. I have an 350 with a TH350 long tail shaft (12"). Was wondering what do I need to complete the swap as  far as the drive train is concerned. Thanks!
Logged

Online zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: 250/3sp to 350/TH350 swap
« Reply #1 on: August 29, 2013, 07:27:24 pm »
I am not sure on the engine mounts but you will have to shorten your drive shaft.  PM me if you want to sell the 3 speed linkages from the column to the transmission and I need the shifter itself.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18454
    • http://www.73-87chevytrucks.com
Re: 250/3sp to 350/TH350 swap
« Reply #2 on: September 25, 2013, 11:05:46 pm »
You will need V8 motor mounts and ideally a radiator and fan shroud to match.  A 12" tail is VERY long...
Logged
Pages: [1]   Go Up
« previous next »