« previous next »
Pages: [1]   Go Down

Author Topic: 1979 C10 Valve Seal Question  (Read 1945 times)

Offline brandon.michaels

  • New Users
  • Posts: 1
  • Newbie
1979 C10 Valve Seal Question
« on: February 02, 2014, 10:35:48 pm »
What size valve seals should i get for my 350? any brands that you guys prefer? Thank you, -Brandon
Logged

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6621
Re: 1979 C10 Valve Seal Question
« Reply #1 on: February 02, 2014, 11:27:58 pm »
The following should work for you...

Quote from: bd on August 09, 2013, 09:49:42 pm
...You can use Felpro Viton Positive-Stop valve stem seals, which are effective and 'do not require machining' of the valve guide boss, or you can use Teflon Positive-Stop valve stem seals that 'require machining' of the valve guide boss.  For an otherwise stock configuration, the Viton seals are preferred and cost less to install.
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)
Pages: [1]   Go Up
« previous next »