« previous next »
Pages: [1]   Go Down

Author Topic: Headers for a Suburban  (Read 4499 times)

Offline 86-K10-Burban

  • New Users
  • Posts: 1
  • Newbie
Headers for a Suburban
« on: August 14, 2014, 04:46:08 pm »
I have a 1986 Chevy K10 Suburban with a 350 in it. I'm looking for a set of headers that will drop right in onto the engine. Since my engine is still in the truck and I don't feel like pulling it out. I already have pulled the starter off and the a/c housing to try my buddies set but they didn't work out. Any suggestions on which headers will work?

Thanks, any help appreciated
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Headers for a Suburban
« Reply #1 on: August 14, 2014, 11:40:37 pm »
     You always have to wiggle headers in to get them in, but a lot of plp on here like the hooker headers.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline bhardy501

  • Newbie
  • Posts: 4
  • Newbie
Re: Headers for a Suburban
« Reply #2 on: January 23, 2015, 04:02:12 am »
On my 89 I cant get them in on the drivers side from the top with the engine in but they slid up from the bottom side with no problem. Passenger side really wasnt a big problem to get in place from the top with the starter removed.
Logged

Offline fitz

  • Senior Member
  • ****
  • Posts: 2085
Re: Headers for a Suburban
« Reply #3 on: January 23, 2015, 09:09:27 am »
What were the headers that you tried off of?
Logged
Pages: [1]   Go Up
« previous next »