cannot find where this lonely brown wire goes near distrib.

[Chevhughes]

1985 c20 stock 350 700r4 trans. Unmolested truck from Calif.

I pulled trans for a rebuild and that has been re-installed. I saw this wire while trans was out and could not see anywhere it may have been. I am finishing up replacing intake gaskets now. and still have nowhere for this wire. It is brown and it says 103 r on the boot. I am going to start looking thru my manual now but figured I would try here as well. Thanks for any help.

[Chevhughes]

truck does not have a tach, it does not go to the distrib from what i can tell, and the wiring is on the oil press sensor..

[HAULIN IT]

That is for the oil sender...What does the wire look like that is on your sender? Does your truck have an original oil pressure gauge & does it work? Some had a light as well, I'm guessing this is the case. Lorne

[Chevhughes]

Thank you for the response, my truck does not have a gauge. it has a light only, the pressure sensor has a plug that pushes on from the top and sorta clamps around the sensor, I don't know how the pics will turn out.

[Chevhughes]

hmmmmm

[zieg85]

That is an oil sending unit plug.  Since you have the light it may be extra.  Doesn't the gauged trucks T off and one is the oil sender and the other is for the electric choke?