« previous next »
Pages: [1]   Go Down

Author Topic: which tailstock do i need  (Read 3661 times)

Offline londonstu

  • Newbie
  • Posts: 5
  • Newbie
which tailstock do i need
« on: April 22, 2015, 08:53:51 pm »
I'm changing from a 250 with a 3speed manual to a 327 with a 350 auto in an 80 c10. is it a straight bolt in and which length tailstock do I need ?  thanks, Stu
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: which tailstock do i need
« Reply #1 on: April 22, 2015, 10:43:29 pm »
a little help with translation, by tail stock you talking about the driveshaft or driveshaft yoke or you talking about the transmissions outputshaft length?
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline londonstu

  • Newbie
  • Posts: 5
  • Newbie
Re: which tailstock do i need
« Reply #2 on: April 25, 2015, 04:13:20 pm »
Quote from: Irish_Alley on April 22, 2015, 10:43:29 pm
a little help with translation, by tail stock you talking about the driveshaft or driveshaft yoke or you talking about the transmissions outputshaft length?
           Sorry about the terminology ,I'm referring to the transmission output shaft length. Thanks,  Stu
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: which tailstock do i need
« Reply #3 on: April 25, 2015, 11:03:48 pm »
the output shaft doesnt matter you just need the proper length drive shaft to fit. you also might need a new cross member from the th350. is this coming out of a truck or car
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline londonstu

  • Newbie
  • Posts: 5
  • Newbie
Re: which tailstock do i need
« Reply #4 on: April 26, 2015, 06:39:13 pm »
Irish.... My truck is a1980 c10. I have the 327 already,but don't have the tranny yet. I was hoping to use the same two piece driveshaft that is in the truck and purchase a transmission that fits. Thanks for your help .   Stu
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: which tailstock do i need
« Reply #5 on: April 26, 2015, 07:31:33 pm »
If you still have the driveshaft from the 3 speed manual, assuming originally a 3 speed on the column, a short tailshaft TH350 will work.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: which tailstock do i need
« Reply #6 on: April 27, 2015, 08:32:00 am »
zieg,  whats the size on the 3 speed? this is different than the 465 right?
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline londonstu

  • Newbie
  • Posts: 5
  • Newbie
Re: which tailstock do i need
« Reply #7 on: April 28, 2015, 08:24:51 pm »
Thanks for the info guys. The truck is original right now with the 3 on the tree, so I'll be looking for a short tail TH350  . Hopefully all goes right.
Logged
Pages: [1]   Go Up
« previous next »