« previous next »
Pages: [1] 2   Go Down

Author Topic: 1974 Chevy K10 .. Zee Beast  (Read 10603 times)

Offline enaberif

  • Junior Member
  • ***
  • Posts: 810
1974 Chevy K10 .. Zee Beast
« on: September 18, 2015, 10:19:33 pm »
Figured I'm show the truck since I'm at a point where I don't feel its a complete turd. Rebuilt the top end and re-sealed the engine over the winter. Just finished putting the 4" lift into it but still have a ways to go before I can really enjoy this truck.

When I bought it.. Yes it is tagged as a GMC but I prefer Chevy.


Motor cleaned up


Bucket seats being installed


New jewellery


And where we sit now.. This picture is almost 1 year since I got the truck
« Last Edit: September 18, 2015, 10:21:17 pm by enaberif »
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 1974 Chevy K10
« Reply #1 on: September 18, 2015, 10:22:15 pm »
please tell me you still have that shell. i dont know why but they seam fitting for trucks this old
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline enaberif

  • Junior Member
  • ***
  • Posts: 810
Re: 1974 Chevy K10 .. Zee Beast
« Reply #2 on: September 18, 2015, 10:31:16 pm »
Quote from: Irish_Alley on September 18, 2015, 10:22:15 pm
please tell me you still have that shell. i dont know why but they seam fitting for trucks this old

haha that shell was so rotted I think termites took home up in it for the last 20 years. When I pulled it off the truck it literally collapsed on itself.
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 1974 Chevy K10 .. Zee Beast
« Reply #3 on: September 19, 2015, 12:29:38 am »
lol awww shame. i was thinking about getting a old slide out camper for my truck but my tool box would get in the way
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 1974 Chevy K10 .. Zee Beast
« Reply #4 on: September 19, 2015, 03:08:21 pm »
http://southjersey.craigslist.org/pts/5197609809.html
this was a cap i found around here. like i said the only thing stopping me was my tool box. and i aint climbing inside a hot cap to get tools lol.
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline enaberif

  • Junior Member
  • ***
  • Posts: 810
Re: 1974 Chevy K10 .. Zee Beast
« Reply #5 on: September 19, 2015, 06:58:23 pm »
I just tried to put my bumper on... What a mess that is!
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 1974 Chevy K10 .. Zee Beast
« Reply #6 on: September 19, 2015, 07:52:15 pm »
right year bumper?
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline enaberif

  • Junior Member
  • ***
  • Posts: 810
Re: 1974 Chevy K10 .. Zee Beast
« Reply #7 on: September 19, 2015, 08:13:27 pm »
Quote from: Irish_Alley on September 19, 2015, 07:52:15 pm
right year bumper?

Yeah brackets are all bent to crap and I have no bolts so trying to figure out the right size. I've got 7/16x1.5" but they don't fit properly.
Logged

Offline frotosride

  • Senior Member
  • ****
  • Posts: 1428
    • WFO CONCEPTS
Re: 1974 Chevy K10 .. Zee Beast
« Reply #8 on: September 19, 2015, 08:59:11 pm »
Truck looks completely different. Amazing what a little love and some Air under the fenders can accommodate!
Logged
"Beat it like a red-headed ford"
1987 v10 Silverado(LQ4), 87 R10,83 K20, 83 cucv 6.2 Detroit
2006 Boulevard M109R 109 cid,2019 M109R BOSS
2009 Jeep XK, (future LS Swap)
GSXR 750 engine awaiting go kart

Offline enaberif

  • Junior Member
  • ***
  • Posts: 810
Re: 1974 Chevy K10 .. Zee Beast
« Reply #9 on: September 20, 2015, 02:36:53 pm »
Welp I now know why the bumper will not go back onto this truck no matter what :( It appears that the frame is perhaps twisted somewhere.

You can see if you look closely you can see that everything on the left side is a good inch or more higher than the right side. The frame horn.. spring hanger... everything. You can even see the difference in the frame horns underneath the radiator :( Anyone think this is fixable? I could also explain the weird behavior when I'm turning this truck.

Logged

Offline frotosride

  • Senior Member
  • ****
  • Posts: 1428
    • WFO CONCEPTS
Re: 1974 Chevy K10 .. Zee Beast
« Reply #10 on: September 20, 2015, 09:27:11 pm »
It was obviously known nc if you look at the lower core support isolators the passenger side is easily thicker than the right. This was to allow the panels to align for the whole front clip. Only way to know is trace the damage and see where the twist and or crack is!!!
Logged
"Beat it like a red-headed ford"
1987 v10 Silverado(LQ4), 87 R10,83 K20, 83 cucv 6.2 Detroit
2006 Boulevard M109R 109 cid,2019 M109R BOSS
2009 Jeep XK, (future LS Swap)
GSXR 750 engine awaiting go kart

Offline enaberif

  • Junior Member
  • ***
  • Posts: 810
Re: 1974 Chevy K10 .. Zee Beast
« Reply #11 on: September 20, 2015, 10:17:18 pm »
Quote from: frotosride on September 20, 2015, 09:27:11 pm
It was obviously known nc if you look at the lower core support isolators the passenger side is easily thicker than the right. This was to allow the panels to align for the whole front clip. Only way to know is trace the damage and see where the twist and or crack is!!!

Yup. I will be taking some axle to frame measurements on all 4 corners after work tomorrow to see how much of a different there is between them. From there I'll figure out what the eff is going on.
Logged

Offline frotosride

  • Senior Member
  • ****
  • Posts: 1428
    • WFO CONCEPTS
Re: 1974 Chevy K10 .. Zee Beast
« Reply #12 on: September 21, 2015, 07:21:36 pm »
If you get that far back and see extremely close measurements keep oin mind that the actual problem is farther forward which is a good thing
Logged
"Beat it like a red-headed ford"
1987 v10 Silverado(LQ4), 87 R10,83 K20, 83 cucv 6.2 Detroit
2006 Boulevard M109R 109 cid,2019 M109R BOSS
2009 Jeep XK, (future LS Swap)
GSXR 750 engine awaiting go kart

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: 1974 Chevy K10 .. Zee Beast
« Reply #13 on: September 21, 2015, 07:29:15 pm »
74 GMC > 74 Chevy
You should put the correct 74 grille on it. Best looking front end in my opinion 73-74 GMC of course I am biased
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline enaberif

  • Junior Member
  • ***
  • Posts: 810
Re: 1974 Chevy K10 .. Zee Beast
« Reply #14 on: September 21, 2015, 08:10:18 pm »
Quote from: VileZambonie on September 21, 2015, 07:29:15 pm
74 GMC > 74 Chevy
You should put the correct 74 grille on it. Best looking front end in my opinion 73-74 GMC of course I am biased


I have a GMC grille but I prefer the Chevy look :P To each their own.
Logged
Pages: [1] 2   Go Up
« previous next »