All Classified forums require a Site Supporter subscription. It is only $25 per year and you can buy and sell whatever you like on the forum. To become a Site Supporter, go to Your Profile and select "Paid Subscriptions."
I am searching for one of those air boxes on a budget, but worse case I plan on using a break and making my own air box mounted on the passenger fenderSent from my iPhone using Tapatalk
The filter housing is in pretty sorry shape, black goo inside the thing and most of the ports were plugged up, I had it in the parts washer all day and put it in carb dip before I left work this evening, are there replacement parts for the housing?Sent from my iPhone using Tapatalk
https://vimeo.com/156643579I mounted this aux fuel water separator temporarily on the inner fender. Once the 6.5 housing is in I will put the aux one in place of my old 80 unit.I cleaned up the 6.5 housing today at work and head blasted it and it turned out really nice except in between the two center tubes where the screen goes, there's some gunk down in there that I couldn't get out with the carb dip, parts washer, brake clean, or compressed air.... I soaked the housing again over night and will check it tomorrow. If I can't get that part clean then I'm going to have to bite the bullet and buy another. Probably won't be able to drive the truck around until this weekend, but I'm hoping this will cure my water issues. I'm draining the filters each time I run it until I'm sure I've had no more issues.Sent from my iPhone using Tapatalk