Author Topic: Thick door coating?  (Read 5043 times)

Offline nucknoel89

  • Frequent Member
  • **
  • Posts: 432
  • Proud to be Canadian!
Thick door coating?
« on: May 02, 2016, 08:28:33 pm »
Hi all, I've been doing door repairs and after wire wheeling away some of the paint I've noticed some thick coating on the metal. At first I thought it was body filler, but it seems to be over the whole door and I've seen this on 2 different doors. I've not seen this on any other body panel. If this is common, what is it and would it be fine to just clean it all off?

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19192
Re: Thick door coating?
« Reply #1 on: May 02, 2016, 08:50:09 pm »
pix?
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline nucknoel89

  • Frequent Member
  • **
  • Posts: 432
  • Proud to be Canadian!
Re: Thick door coating?
« Reply #2 on: May 03, 2016, 12:54:49 am »
pix?
I'll try and take some in the morning

Offline nucknoel89

  • Frequent Member
  • **
  • Posts: 432
  • Proud to be Canadian!
Re: Thick door coating?
« Reply #3 on: May 03, 2016, 02:18:51 pm »
One side is the door, the other side is the patch piece from a different door.

Offline jg1977c20

  • Registered Users
  • *
  • Posts: 104
  • Newbie
Re: Thick door coating?
« Reply #4 on: May 19, 2016, 03:05:31 am »
mother cigrit that looks ...okay well i see sealer , primer , more primer ,bondo on the right and left
1977 c20 cheyenne camper special 8200gvw

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Thick door coating?
« Reply #5 on: May 22, 2016, 07:27:56 pm »
Looks like body filler to me.
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline FlatBlack77

  • Junior Member
  • ***
  • Posts: 894
  • Cheap Fast Reliable - Pick 2
Re: Thick door coating?
« Reply #6 on: May 22, 2016, 08:40:59 pm »
"When you are a hammer, everything looks like a nail"
'77 C/10 - 350/350 mild street motor

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Thick door coating?
« Reply #7 on: May 24, 2016, 08:51:11 pm »
I use old hoods, doors, etc. to make a lot of my patch panels. I always grind them down to just about bare metal before I cut, bend, or weld to the vehicle being repaired.
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs