Author Topic: Np203? ? ?  (Read 2902 times)

Offline aarontaylor2008

  • Newbie
  • Posts: 10
  • Newbie
Np203? ? ?
« on: June 17, 2016, 08:49:10 am »
Recently purchased a new tranny married to a t-case. I believe the t case is a 203 and not sure if it work for my setup. If anyone out there is using a np203 in a mid 80's half ton and did you have to modify anything to bolt up the front drive shaft???

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Np203? ? ?
« Reply #1 on: June 17, 2016, 08:58:55 am »
in 77 ish they changed how the driveshaft bolts to the transfer case (yoke vs flange). being you would probably have to reuse the 203 driveshaft it shouldnt matter (due to length difference in the transmission and transfer case) hopefully you got the driveshafts
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline aarontaylor2008

  • Newbie
  • Posts: 10
  • Newbie
Re: Np203? ? ?
« Reply #2 on: June 18, 2016, 10:00:47 pm »
No drive shafts just the tranny and tcase, but it does have the flange just like my old old

Sent from my SAMSUNG-SM-N910A using Tapatalk


Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Np203? ? ?
« Reply #3 on: June 19, 2016, 07:02:30 am »
i did find some measurements on the trans and adapters and transfers cases
http://forum.73-87chevytrucks.com/smforum/index.php?topic=32506.0
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline aarontaylor2008

  • Newbie
  • Posts: 10
  • Newbie
Re: Np203? ? ?
« Reply #4 on: June 26, 2016, 07:33:24 pm »
i did find some measurements on the trans and adapters and transfers cases
http://forum.73-87chevytrucks.com/smforum/index.php?topic=32506.0
Thanks for the info

Sent from my SAMSUNG-SM-N910A using Tapatalk