Author Topic: I need some help....  (Read 3794 times)

Offline bike4life454

  • Newbie
  • Posts: 6
  • Newbie
I need some help....
« on: September 29, 2016, 07:22:36 pm »
I have been trying to find a replacement for the steering shaft coupling(I'm not sure that's what it is so I circled the part in the picture) but I cent find it anywhere.. If anyone knows where to get it other than a junk yard I would really appreciate it.


http://cloud.tapatalk.com/s/57edb0461c3dd/Capture%2B_2016-09-29-17-10-42.png?


Sent from my VS985 4G using Tapatalk


Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: I need some help....
« Reply #1 on: September 29, 2016, 07:57:25 pm »
called a rag joint. they sell them at your local parts store for not too much. theres two sizes, should be the smaller size
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline bike4life454

  • Newbie
  • Posts: 6
  • Newbie
Re: I need some help....
« Reply #2 on: September 29, 2016, 08:57:33 pm »
called a rag joint. they sell them at your local parts store for not too much. theres two sizes, should be the smaller size
I was under the impression the rag joint was the component closer to the steering box..

Sent from my VS985 4G using Tapatalk


Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: I need some help....
« Reply #3 on: September 29, 2016, 09:04:25 pm »
sorry cant see the picture due to a firewall. but yes the rag joint connects the steering intermediate shaft with the steering box 
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline bike4life454

  • Newbie
  • Posts: 6
  • Newbie
Re: I need some help....
« Reply #4 on: September 29, 2016, 09:52:53 pm »
That's what I thought. But it's the piece closer to the steering column, mine has a shoot ton of play.

Sent from my VS985 4G using Tapatalk


Offline SinisterC10

  • Newbie
  • Posts: 93
  • Newbie
Re: I need some help....
« Reply #5 on: October 04, 2016, 11:10:57 pm »
I have been trying to find a replacement for the steering shaft coupling(I'm not sure that's what it is so I circled the part in the picture) but I cent find it anywhere.. If anyone knows where to get it other than a junk yard I would really appreciate it.


http://cloud.tapatalk.com/s/57edb0461c3dd/Capture%2B_2016-09-29-17-10-42.png?


Sent from my VS985 4G using Tapatalk

That part is called an intermediate shaft steering u-joint.....or steering U-joint for short.

If you were to remove that metal cover and boot you would see a u-joint in there similar to a driveline ujoint....just smaller.

If you can't find one at your local parts store or through one of the resto sites then go to  http://www.borgeson.com/xcart/home.php?cat=34

Borgeson makes top of the line steering parts. If you have to end up buying the entire intermediate shaft assembled then get it from Borgeson instead of a factory replacement or repop part. They are close to the same price.

I would never put a used joint or intermediate shaft assembly from a junkyard back on. Always buy these parts new.
« Last Edit: October 05, 2016, 12:03:20 am by SinisterC10 »