« previous next »
Pages: [1]   Go Down

Author Topic: 78 gmc Heavy Half - rebirth  (Read 7296 times)

Offline Armor

  • Registered Users
  • *
  • Posts: 139
78 gmc Heavy Half - rebirth
« on: February 21, 2017, 12:02:31 pm »
rebuilt over the last 2ish years, my 79 was falling apart from the salt and rust, and being daily driven for 8 years, so decided to go for it and do a full rebuild:

started with a solid frame, resurfaced and painted black,  you can see the shine on the crossmember. had a buddy with a hi-ab crane lift the cab to go back on the frame, saved a lot of effort.
Logged

Offline Armor

  • Registered Users
  • *
  • Posts: 139
Re: 78 gmc Heavy Half - rebirth
« Reply #1 on: February 21, 2017, 12:06:05 pm »
dad made a bed lift frame for the engine hoist, worked great to get it off the front edge and back on the frame, the bed is rust free- was a great find up here. also shown is the electric fans from a windstar van that i now have on toggle switches in the ashtray, for on/off with temp, and both on. also realized how hard it is to replace the front header panel with the bed mounted, was a bad choice..... will do it off the truck if i have to again lol.
Logged

Offline Armor

  • Registered Users
  • *
  • Posts: 139
Re: 78 gmc Heavy Half - rebirth
« Reply #2 on: February 21, 2017, 12:09:17 pm »
made some brackets for a 75 grill to fit the 78 rad support, they work great. Also nabbed a set of 68-72 gmc fender badges to out on, love the look of them. also pictured is the interior from the 79 truck from before.
Logged

Offline Armor

  • Registered Users
  • *
  • Posts: 139
Re: 78 gmc Heavy Half - rebirth
« Reply #3 on: February 21, 2017, 12:12:05 pm »
here is the tach/fuel combo gauge installed, works perfect and allows for a trans temp gauge in the dummy spot on the side,.

then i found the cab rust.... from tar paper sound deadener and paint, i didn't find until i started sanding for paint, so back on the grinder to get rid of the cancer. took way longer then i wanted, as i can only work on it on saturdays.
Logged

Offline Armor

  • Registered Users
  • *
  • Posts: 139
Re: 78 gmc Heavy Half - rebirth
« Reply #4 on: February 21, 2017, 12:14:21 pm »
Started final sprint for painting, sealer primer and high build, and alot of sanding, as expected, the last 10% takes the longest...
also stirring up the light quasar blue metallic, mesmerizing
« Last Edit: February 21, 2017, 12:20:31 pm by Armor »
Logged

Offline Armor

  • Registered Users
  • *
  • Posts: 139
Re: 78 gmc Heavy Half - rebirth
« Reply #5 on: February 21, 2017, 12:15:56 pm »
final taping off before going into the portable garage/paint booth, last pics are after first clear coat.
Logged

Offline Armor

  • Registered Users
  • *
  • Posts: 139
Re: 78 gmc Heavy Half - rebirth
« Reply #6 on: February 21, 2017, 12:17:45 pm »
right after the last coats, about to button up for the weekend to cure/no touchie.
the filter shows what lungs would look like. please wear a mask when painting!
Logged

Offline Armor

  • Registered Users
  • *
  • Posts: 139
Re: 78 gmc Heavy Half - rebirth
« Reply #7 on: February 21, 2017, 12:23:02 pm »
fresh out of the booth and getting ready for reassembly. also decided way too late to not use some bed holes, so i used red fender washers and stainless bolts, they look good enough and will serve as a reminder to make up my mind before the paint hits a gun....
Logged

Offline Armor

  • Registered Users
  • *
  • Posts: 139
Re: 78 gmc Heavy Half - rebirth
« Reply #8 on: February 21, 2017, 12:25:54 pm »
finally, trim attachment, 3d printed some tailgate band brackets, after refreshing the trim and cab trim. super happy with the truck, now i have to replace the transmission (700r thats slipping) and its good to go again! just need some fender trim, painted to match the 77 yellow, and its all set.
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19189
Re: 78 gmc Heavy Half - rebirth
« Reply #9 on: February 21, 2017, 12:33:33 pm »
Nice job!
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Armor

  • Registered Users
  • *
  • Posts: 139
Re: 78 gmc Heavy Half - rebirth
« Reply #10 on: February 21, 2017, 12:47:20 pm »
thanks Vile, not pictued here is the Vintage air AC install, went pretty easily, I've lost the pictures, and of course, by the time i got it all back together, it was cool enough for no AC.... figures lol.
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 78 gmc Heavy Half - rebirth
« Reply #11 on: February 23, 2017, 09:00:45 am »
good job. nice looking truck
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline blazer74

  • Junior Member
  • ***
  • Posts: 786
  • Newbie
Re: 78 gmc Heavy Half - rebirth
« Reply #12 on: February 23, 2017, 06:37:46 pm »
Nice!
Logged

Offline harcorshe

  • Newbie
  • Posts: 67
  • Newbie
Re: 78 gmc Heavy Half - rebirth
« Reply #13 on: February 24, 2017, 09:42:31 am »
Very nice! That's a great color choice.
Logged
'78 K20
454
TH400
14 Bolt
205 Transfer Case

Offline MrFats

  • Newbie
  • Posts: 4
  • Newbie
Re: 78 gmc Heavy Half - rebirth
« Reply #14 on: March 05, 2017, 02:07:22 pm »
Quote from: Armor on February 21, 2017, 12:23:02 pm
fresh out of the booth and getting ready for reassembly. also decided way too late to not use some bed holes, so i used red fender washers and stainless bolts, they look good enough and will serve as a reminder to make up my mind before the paint hits a gun....
Love it man!!!


Sent from my iPhone using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »