Author Topic: 22x9 BS Issue on 86 C10  (Read 3501 times)

Offline JonStrobel

  • New Users
  • Posts: 2
  • Newbie
22x9 BS Issue on 86 C10
« on: April 04, 2018, 09:33:51 am »
Looking for a little insight here.  1986 Sierra 1500,  Pancaked front cross member, PB 1inch narrowed, 1 inch forward control arms, 3 inch drop spindles, Z to get the frame rails on the ground.  Really want to run the Detriot Steel Wheels Delray in 22x9.  The largest backspacing they can make in a 22 is 4.5  I know I should be looking for 5.5ish but with the narrowed arms, any chance they'll clear the fenders.  Haven't run a wheel this large, any opinions and experience appreciated.

Offline Rapid Roy

  • Junior Member
  • ***
  • Posts: 644
  • Euless, Texas
Re: 22x9 BS Issue on 86 C10
« Reply #1 on: April 04, 2018, 11:06:43 am »
Welcome
1974 Cheyenne 10 LWB STOCK 350 W HEI /TH350/AC/4 BBL Quadrajet
Mopar by Birth
Chevy by Choice

Offline JonStrobel

  • New Users
  • Posts: 2
  • Newbie
Re: 22x9 BS Issue on 86 C10
« Reply #2 on: April 04, 2018, 06:28:56 pm »
Thanks.

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10