Author Topic: Raising a lowered truck two inches  (Read 1378 times)

Offline c10rider

  • Newbie
  • Posts: 33
  • Newbie
Raising a lowered truck two inches
« on: December 04, 2019, 06:06:33 PM »
I have a 74 c10 stepside I lowered it 4 1/2 in the front and 6 inches in the back , the back is c notched and the front has 2 1/2 drop spindles and 2 inch drop springs , id like to lift it 2 inches , does anyone have any suggestions without having to break it all down again


Sent from my iPhone using Tapatalk

Offline c10rider

  • Newbie
  • Posts: 33
  • Newbie
Raising my lowered truck two inches
« Reply #1 on: December 28, 2019, 06:14:24 PM »
Hello everyone I have a 1974 c10 stepside that I lowered 4 1/2  inches in the front and 6  inches in the back I have three inch springs and 2 1/2 inch drop spindles in the front and I c notched in the back , id like to raise it two inches all around is there anyway to do it without breaking it all down again


Sent from my iPhone using Tapatalk

Offline Emoo99

  • Newbie
  • Posts: 4
  • Newbie
Re: Raising a lowered truck two inches
« Reply #2 on: January 03, 2020, 08:27:19 PM »
Bigger tires?
Put a jack stand under it? Lol..
Rear may be easier to change springs but not sure about an easy fix for the front.

Maybe a 2 inch body lift?


Sent from my iPhone using Tapatalk

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 17703
Re: Raising a lowered truck two inches
« Reply #3 on: January 04, 2020, 06:51:11 AM »
Put stock springs back in the front. You didn't say how the rear is lowered but undoing the spring alterations is the logical thing to do.
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

Offline c10rider

  • Newbie
  • Posts: 33
  • Newbie
Re: Raising a lowered truck two inches
« Reply #4 on: February 03, 2020, 06:17:44 AM »
The rear is c-notched


Sent from my iPhone using Tapatalk