Author Topic: Master cylinder help!  (Read 672 times)

Offline Wayner

  • Newbie
  • Posts: 16
  • Newbie
Master cylinder help!
« on: December 20, 2019, 07:32:05 PM »
I have installed Wilwood dual piston D52 calipers on stock 1.25 rotors in front and 93 Camaro calipers with Impala rotors in the rear. I have a Wilwood proportioning valve but I really do not know what master cylinder to install. I'm leaning towards the 1 1/8 bore cylinder but I'm not sure. Anyone have a similar set-up that has experience with this set-up that can help?
« Last Edit: January 03, 2020, 07:40:04 PM by Wayner »

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 17790
Re: Master cylinder help!
« Reply #1 on: December 20, 2019, 08:38:45 PM »
What are we working on?
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

Offline Wayner

  • Newbie
  • Posts: 16
  • Newbie
Re: Master cylinder help!
« Reply #2 on: January 03, 2020, 07:36:59 PM »
I have a 76 GMC C15.

Offline Emoo99

  • Newbie
  • Posts: 4
  • Newbie
Master cylinder help!
« Reply #3 on: January 03, 2020, 08:08:14 PM »
I just installed a master from an old 4-wheel disc corvette.. I think it was a 70’ or 80’s but it works great on my 77’
I have stock front disc with wilwood disc on a strange Dana 60 in the rear


Sent from my iPhone using Tapatalk

Offline Emoo99

  • Newbie
  • Posts: 4
  • Newbie
Re: Master cylinder help!
« Reply #4 on: January 03, 2020, 08:09:25 PM »
It also fit t my booster perfect. I believe it was 1-1/8 bore. Not positive.


Sent from my iPhone using Tapatalk

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 17790
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)