« previous next »
Pages: [1]   Go Down

Author Topic: Turn signals  (Read 2118 times)

Offline TheBigHat

  • Newbie
  • Posts: 35
  • Newbie
Turn signals
« on: February 04, 2021, 05:29:44 pm »
Recently my turn signals have stopped working. My hazards work but they just blink quickly. Not sure they are supposed to do that. When I use the lever there is no light on the dash either. I tried the flasher fuse. That didn't work. Where do I beigin on this issue?
Logged

Online bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6592
Re: Turn signals
« Reply #1 on: February 04, 2021, 07:12:59 pm »
Year, make, model?

Does it have two flashers?  It should.  Try switching them.
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline TheBigHat

  • Newbie
  • Posts: 35
  • Newbie
Re: Turn signals
« Reply #2 on: February 05, 2021, 06:10:26 am »
78 K20, I only saw one under there. I'll look again.
Logged

Online bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6592
Re: Turn signals
« Reply #3 on: February 05, 2021, 10:02:07 am »
If there is only one, replace the one that is missing.  You probably should replace the hazard flasher, regardless.  If the corner lamps are LED, use flashers designed for LEDs.
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)
Pages: [1]   Go Up
« previous next »