« previous next »
Pages: [1]   Go Down

Author Topic: Loose Gear Selector lever.  (Read 4162 times)

Offline mpellis

  • Newbie
  • Posts: 10
Loose Gear Selector lever.
« on: March 09, 2007, 05:06:00 am »
I have a 1982 Chevy K10 with automatic transmission. The gear selector lever is loose. When I pull it back to change gears it does not want to spring forward very well when I let go of it. What do I most likely need to do to repair it and how difficult is it? Thanks for sharing your knowledge. It is appreciated.

Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Trans
« Reply #1 on: March 09, 2007, 08:20:00 pm »
If you have a column shifter the bushings wear out on the frame pivot and the shift linkage wears out where it connects to the trans. An easy cheap fix is to take up the slop by sliding a piece of vacuum hose over the worn components...

Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Pages: [1]   Go Up
« previous next »