Author Topic: Wiring Issues  (Read 2909 times)

Offline BigTree

  • Newbie
  • Posts: 15
Wiring Issues
« on: October 09, 2007, 09:06:44 pm »
Hey guys.

Out of no-where my truck has no power with the key in the on position.  Like wipers dont work, the starter doesnt start.  But I can still turn the headlights on and everything that is NOT powered by the ignition system.

If I jump power from my battery to the little distribution block on the firewall with 2 studs (2 wires on one stud) (I believe one is Distributor and the other is to fuse box) It works great.  I can start the truck and use everything.  I have replaced the fuseable link with an ATC fuse holder now, solder and shrink wrapped. 

Any ideas where I should be looking?  Thanks guys.

Trevor

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19181
Re: Wiring Issues
« Reply #1 on: October 09, 2007, 09:40:06 pm »
check your fusible links a the junction block and down by the starter solenoid. Make sure no wires are chaffed or burned through.
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10